Product Description Of The TPU Air Hose
SIZE:1/4'' fiber braided transparent blue air hoseFITTING: 1/4'' NPT brass fitting both ends with plastic tail
Inside diameter:6.35mm, outside diameter:9.35mm
Working pressure:150P.S.I., burst pressure:450P.S.I.
Working temperature:-40 to +80 degree.
TPU Characteristic:
1.     Having excellent flexibility, the bevelling radius is small.
2.     Good anti-knocking property and the nature is light.
3.     The operating temperature and the working pressure scope is wide.
4.     Having the excellent chemical properties,the pressu loss is minimum.
5.     Degree of hardness is constant,the sercice life is long.
6.     Non-toxic,tasteless.
7.     Custom-made color is doable,easy pipeline recognition.
8.     Conform to the ROHS/REACH/CE environmental protection requirement.
Product Usage:
Industry robot,pneumatic tool,assemblt plant air pressure tool.
The duct with pressure.
Transport water and other liquid.
Being used as the vacuum sucker.
Metal and electronic products protection coat.
Ornament(for example handle and so on).
Specifications:
Material:Polyurethane
Fluid:air,water, oil
Operating Temperature: -40ºC+80ºC (For Non-Chemical GAS Space)
Tube O.D.:1mm to 19mm   Â
Tube O.D:2.5mm to 21mm  Â
Diameter Tolerances ±0.1mm~±0.15mm
Shore: hardness 65A---98A
Tensile Strength: 400kgf/cm² (5690 PSI)
Elongation at Break 490-590%
Abrasion 35mg
Tearing Strengh 1565 PSI(110kg/cm2)
Safety Factor--3:1
PU MATERIAL PROPERTY:Â
Manufactured 100% higher pure polyurethane raw materials, make products to guarantee with PU material characteristic of flexibility, non-toxic, harmless to the human body. Having excellent flexibility, high pressure resistance, resistance to wear and tear, resistant to twists and turns, a high elastic recovery memory effect, being 100% incineration ash, being approved by the environmental protection product.
INNER PACKING:
One type packing:wood reel, can roll
Another type packing:plastic reel,gift box.
OUTER PACKING:carton
LENGTH:100M/ROLL,200M/ROLL,300M/ROLL,500M/ROLL,1000M/ROLL.
Pneumatic TPU Tube  Size :
note:the following size is just for you refer , unstandard size is custom-made .
Â
Manual Saw Blade Pipe Cutting Machine
1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.
Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutting.com