| TypeT | Measure | Picture | Specification | Fitting | Quotation factor |
| 45 type | 35X33X40.5cm   (LengthXWidthXHeight) |
|
medium:diesel, kerosene      motor power:550W         inlet:1", outlet:1" accuracy:±0.3%  max. flow rate:35litre/min voltage:DC12V,DC24V,AC220V with oval gear flowmeter sensor notice:NO gasoline |
3/4" automatic nozzle, 3/4" deliver hose 4m,hose connector 1pc, check valve 1pc, hose clamps 2pcs | 12V,24V,220V |
| 625 type | 38X38X62.5cm  (LengthXWidthXHeight) |
|
medium:diesel, kerosene      motor power:550W         inlet:1", outlet:3/4", 1" accuracy:±0.3%  max. flow rate:3/4" 48Litre/min, 1" 54Litre/min voltage:DC12V,DC24V,AC220V with fuel pump, 50 flow meter notice:NO gasoline |
3/4" or 1" automatic nozzle, 3/4" or 1" deliver hose 4m,hose connector 1pc, check valve 1pc, hose clamps 2pcs | 12V,24V,220V, 3/4", 1" |
| 110 type | 60X40X111cm   (LengthXWidthXHeight) |
|
medium:diesel, kerosene, gasoline inlet:1.5", outlet:3/4", 1" accuracy:±0.3%  max. flow rate:3/4" 60Litre/min, 1" 70-80Litre/min voltage:AC220V, AC380 with flowmeter, sensor notice:NO gasoline |
3/4" or 1" automatic nozzle, 3/4" or 1" deliver hose 4m | 220V non-explosionproof,380 explosionproof,3/4", 1" |
| 220V explosionproof, 3/4", 1" | |||||
| 160 type | 73X47X160cm   (LengthXWidthXHeight) |
|
medium:diesel, kerosene, gasoline inlet:1.5", outlet:3/4", 1" accuracy:±0.3%  max. flow rate:3/4" 60Litre/min, 1" 70-80Litre/min voltage:AC220V, AC380 with flowmeter, sensor notice:NO gasoline |
3/4" or 1" automatic nozzle, 3/4" or 1" deliver hose 4m | 220V non-explosionproof,380 explosionproof,3/4", 1" |
| 220V explosionproof, 3/4", 1" |
The die casting process involves the use of a furnace, metal, die casting machine, and die.
The metal, typically a non-ferrous alloy such as aluminum, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting.
The castings that are created in this process can vary greatly in size and weight, ranging from a couple ounces to 100 pounds. One common application of die cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.
Metal housings for a variety of appliances and equipment are often die cast.
Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Other common die cast parts include propellers, gears, bushings, pumps, and valves.
Die Casting Cnc,Cnc Die Casting,Cnc Lathe Machining,Aluminum Die Casting
Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com