Xinhuanet Guangzhou, June 18th Guangzhou Honda Automobile Co., Ltd. submitted a report to the relevant state authorities on the market for free overhaul or replacement of fuel tanks. Due to the spalling phenomenon in the fuel tank and the fuel tank bracket welding joints in a few of the 03 models of the Accord sedan, Guangzhou Honda Motor Co., Ltd. will produce a total of 70 paragraphs of Accord sedan cars produced from January 15, 2003 to October 29, 2003. Vehicle, free overhaul or replace the new fuel tank. The person in charge of Guangzhou Honda said: Guangzhou Honda has always stressed that "do not manufacture, not let go, do not accept" every bad product. Although only a few of the 03 models of the Accord sedan saw the phenomenon of cracking at the welding joints of the fuel tank and the fuel tank bracket in the tank, and so far, there has been no accident for this reason. However, as a responsible company, the quality problem is no small matter. Product quality is the life of a company. Customer satisfaction is a goal pursued by the company. Guangzhou Honda took this measure, which is a reflection of the concept of corporate honesty and quality consciousness that is deeply rooted in the heart. On May 17, 2003, Guangzhou Honda paid great attention after receiving the first market report. In late May last year, after detailed analysis of the reasons and the road fact-finding tests conducted by Guangzhou Honda in conjunction with the parts suppliers, it was found that the rapid vibration of the vehicle caused the vehicle body to vibrate strongly, which may lead to vibration of the fuel tank and the fuel tank bracket weld in the tank. crack. According to the Guangzhou Honda confirmed, so far, 03 Accord cars did not cause an accident due to this reason. Due to the adoption of the new technology, this will not happen in the 03 Accord sedan cars produced by Guangzhou Honda after October 29, 2003. Other models produced by Guangzhou Honda have no such problems. From June 18th, 2004, the Guangzhou Honda Automobile Special Service Store will notify the vehicle users of the free maintenance or replacement of the new fuel tanks from June 21 through letters and telephones until the disposal is completed. Guangzhou Honda and each special sales service store will also set up a user inquiry hotline to accept the user's consultation on relevant issues. The customer service hotline of Guangzhou Honda Automobile Co., Ltd. is 800-830-8999 or 020-82210821. The person in charge of Guangzhou Honda said in an interview with Xinhua News Agency reporters; “So far, Guangzhou Honda has built 200 special sales service stores across the country. They have complete user information. Through this network, we can quickly notify the target vehicles. Users are free to overhaul or replace new fuel tanks at special stores, so users do not have to worry about their vehicles being missed. This comprehensive after-sales service network is the strong backing for our previous market measures.†Since parts and components will arrive on a batch basis, Therefore, this free maintenance or replacement of the new fuel tank will continue for some time, Guangzhou Honda also hopes that users can give understanding and cooperation. (Reporter Chen Hao)
Hi-Carbon Steel Cut Wire Shot, also named Reinforced Steel Shot, has a great effect on die casting parts which has a high hardness because Longlived Hi-Carbon Steel Cut Wire Shot also have high hardness while other Metal Abrasive can not meet.
Longlived Hi-Carbon Steel Cut Wire Shot is made from high quality hi-carbon steel wire by drawing, cutting and rounding. Its chemical composition is : Si:0.10-0.30%, Mn:0.40-1.20%, C:0.45-0.85%, S≦0.04%, P≦ 0.04%. Longlived Hi-Carbon Steel Cut Wire Shot is producted strictly in accordance with German standard VDFI8001/2009 and American standard SAEJ441,AMS2431. There are four types of hardness of Longlived Hi-Carbon Steel Cut Wire Shot and they are HRC 45-50, HRC 50-55, HRC 55-60 and HRC 58-63. As the development of advance technology of Longlived Metal, we have five shapes and they are as cut, G1, G2, G3 and even G4 condition, which could meet most requirement of clients. In addition, the size of Longlived Metal is from 0.25mm-2.5mm and size also could be customized if need. Longlived Hi-Carbon Steel Cut Wire Shot has a great fatigue life and it could be recycled from 3,500 times to 9,000 times. It could not only save cost but also make shot blasting faster and cleaner.
Hi-Carbon Steel Cut Wire Shot,High-Carbon Steel Cut Wire Shot Peening,High-Carbon Steel Cut Wire Shot Blasting,High-Carbon Steel Cut Wire Shot Distributor
Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com