After the car is used for a period of time, there are many problems, such as wear of mechanical parts, carbon deposits, etc., so car maintenance is very important. If the car is not properly maintained, there will be some failures. If you find that your car has unstable speed, increased fuel consumption and decreased power performance, it may be caused by carbon deposits on the throttle.
The cause of the carbon deposit in the throttle
Throttle carbon deposits may be caused by a variety of reasons, including poor fuel quality, poor air quality and other reasons, fuel combustion is not complete; valve oil seal leakage, resulting in recovery system failure oil absorption; poor road conditions, slow car speed, When the engine reaches the normal temperature, the evaporation speed of the gasoline is slow when it is sprayed on the back of the valve. In addition, it may be caused by a series of reasons such as engine oil failure, cylinder pressure problem, and leakage of the cylinder bed.
Hazard of throttle carbon deposit
Slight or moderate carbon deposits have little effect on daily driving, but have a greater impact on idle conditions. At idle, the throttle opening is small, and carbon deposition further reduces the amount of intake air at idle, resulting in unstable engine operation and even flameout. In addition, the power is reduced, the fuel consumption is increased, the car is running weak, and the exhaust pollutants are increased. If it is serious, it may cause valve burnout, premature combustion or explosion or even scrap.
Cleaning the throttle
In fact, cleaning the throttle is not a very difficult thing, just remove the throttle and clean it with a chemical. However, it should be noted that if the throttle is moved or the throttle sensor wiring is removed during the cleaning process, the ignition switch needs to be turned to the on position before starting the vehicle, and the vehicle is restarted after the engine is re-learned.
However, it should be noted that the throttle valve does not need to be cleaned frequently. If it is always cleaned, it is not good, and it is easy to damage the structure and affect the working effect.
Cars should not be able to avoid carbon deposits. In addition to the throttle, such as spark plugs, combustion chambers, intake pipes, etc., we must do a good job in addition to regular maintenance, but also maintain good driving habits, reduce some of the car Damage to critical components.
he Molded Graphite blocks produced by our company are also called Carbon Graphite Blocks, which can be divided into extruded graphite blocks, extruded graphite squares, molded graphite blocks, molded graphite blocks, Isostatic Graphite blocks, and graphite blocks according to different processing procedures. Different particle sizes can be divided into: fine-grained graphite block, graphite square, medium and coarse-grained graphite block, graphite square, coarse-grained graphite block, etc. Strong chemical stability, high temperature resistance, corrosion resistance, strong lubricity, long service life, can be customized according to customers. Needs to be customized according to size.
Henan Kaiyuan special high-purity graphite manufacturer, Large Graphite Block, the use of molded graphite block: widely used in refractory materials and coatings in the metallurgical industry, stabilizers for industrial pyrotechnic materials, pencil leads in light industry, carbon brushes in electrical industry, and batteries in battery industry. Electrodes, fertilizer industry catalyst additives, etc. After deep processing, high-purity graphite can also produce high-tech products such as graphite milk, graphite sealing materials and composite materials, graphite products, and graphite anti-friction additives, which have become important non-metallic mineral raw materials in various industrial sectors.
Molded Graphite,Large Graphite Block,Molded Graphite Block,Carbon Graphite Block
Henan Carbon Road New Material Technology Co., Ltd , https://www.kyisostaticgraphites.com