Chamber Vacuum Dryer Used in Pilot Plant

It is well known that vacuum drying is to make raw materials be the state of vacuum by heating and drying. Use vacuum pump to suck the air and exhaust moisture, and the drying speed will be faster.

Notes: If using condenser, the solvent in raw materials can be recovered. If using SK series water ring vacuum pump or ZSW series hydraulic injection vacuum pump sets, there is no need to use the condenser and the investment can be saved.

It is suitable for drying heat sensitive raw materials that will decompose, polymerize and metamorphose at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Features:
1. Under the vacuum, the boiling point of raw materials will decrease and materials can be heated more uniformly.
2. Heat source: low pressure steam, conduction oil, electricity and hot water.
3. The heat loss of evaporator is less.
4. Before drying, the disinfection can be carried out. During the period of drying, there are no impure materials mixed. It is conformity with the requirement of GMP.
5. It belongs to a kind of static dryer. So the shape of raw materials to be dried will not be destroyed.

Technical Specification:
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.

The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.

The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.

For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.

With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.

Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after   the installation and commissioning of the equipment, whichever comes first.

2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.

4. Q: Are you a factory or a trading company?
    A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing. 












 

EVA Mat

EVA mat is a kind of foam mat for EVA sport mat, EVA Exercise Mat, and EVA training mat, made from Eco-friendly, high density, closed cell, non-smell and non-toxic EVA foam material.

The EVA mat is offered in either 60cm x 60cm size or 100cm x 100cm size. 60cm x 60cm size. With interlocking edges, the mats can be easy to connect together without any loose.

60cm x 60cm EVA mat is normally applied in room, or gym. It is easy to store, more popular for the personal exercise lovers to use at home. Also it can be a good protection for home flooring if you are intended to set up a heavy training equipment in your house.

100cm x 100cm EVA mat is also called Martial Arts Mat, Taekwondo mat, Karate mat, Judo mat, Jiu Jitsu mat and Aikido mat, cause it is normally applied in dojo for Taekwondo, Karate, Judo, Jiu Jitsu and Aikido training. Also the mat is reversible with double colors, which forms a standard size flooring for training.

Eva Mat,Eva Tatami Mat,Training Mat,Judo Mats,Interlocking Foam Tiles,Eva Foam Mat

Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmarine.com