As one of the most advanced press technology in the world, servo press technology is suitable for processing large-scale covers of automobiles. Only a few companies in foreign countries have mastered this technology and put a small amount into production.
It is understood that compared with the traditional mechanical press, the main drive of the servo press is changed from the original quantitative control to any programming control. The entire stamping process cycle can be adjusted arbitrarily, making the energy distribution more reasonable and highly flexible connection with the automation system. To greatly improve production efficiency.
Plastic Film Dewatering Drying Machine
Plastic Film Dewatering Drying Machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed,using the squeeze dewatering principle,squeeze the water from the plastic by rotating screw.The water will flow out from the bottom,the plastic will get hot by high intensity extrusion friction,and will plasticizing mildly after the mould heating.Finally the blade will cut the granules from the mould.
Advantage of squeezer dryer plastic machine:
1. Low power consumption. Main motor power between 90kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%
2. Small land occupied
3. Low rotation speed, almost no noise.
4. Dewatering function is better, final products humidity less then 3%
5. After squeeze dry granulating machine, the material can put into granulator driectly, do not need the forced feeding machine.
6. Mechanical squeeze dewatering,compared with the original hot air drying, do not need use dewatering machine, drying system and the agglomerator machine,it can save the energy greatly.
Plastic Film Dewatering Drying Machine,dewatering plasticplastic dewater machine,dry plastic dewatering machine
zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com