It can be used in different kinds of acids bases and salts gas, liquid,stream and slurry transportation
system in the industry of petrifaction, metallurgy, papermaking, power station and oil refining.
 Â
 This is the best substitute product for titanium and Monel valve when it is stronglycorroded.Meanwhile,it
is effective and long time operating (2 to 4 times than titanium valve)with low cost. And it can be driven by
hand, air, spring return pneumatic, electron and etc.As for special valve, we can design it as customers' needs.Â
Â
Product Name |
Ceramic ball valve |
Material |
Alumina, Zirconia and Silicon Nitride ceramic                                           |
Color |
White and Black |
Size |
DN15-DN200,  And According to drawings |
Surface Roughness          |
Ra 0.05 |
Roundness |
0.005mm |
Lead time |
15 - 30days |
Torlerance |
+/- 0.005mm |
Samples |
Avaliable |
Shipping |
Air Express (DHL/UPS/TNT/ FedEx) or Ocean Shipping |
| Properties | Units | 96% Al2O3 |
99% Al2O3 |
Zirconia | Silicon Nitride |
Machinable Ceramic |
| Material Characteristics   | ||||||
| Gas Permeability   |  | 0 | 0 | 0 | 0 | 0 |
| Water Absorption    | % | 0% | 0% | 0% | 0% | 0.038% |
| Colour | Â | White | Ivory | White | Grey | White |
| Density  | g/cm3 | 3.7 | 3.85 | 6 | 3.2 | 2.7 |
| Physical Characteristics   | ||||||
| Hardness   | Kg/mm2 | 1100 | 1400 | 1100 | 1600 | 1175 |
| Modulus of Elasticity   | Gpa | 300 | 350 | 200 | 300 | 65 |
| Flexural Strength  | Mpa | 300 | 340 | 1150 | 600 | 108 |
| Compressive Strength  | Mpa | 2100 | 2200 | 2500 | 2500 | 488 |
| Fracture Toughness  | Mpam1/2 | 3.5 | 4 | 12 | 6 |  |
| Thermodynamic Property   | ||||||
| Max Use Temperature   | °C | 1500 | 1650 | 1500 | 1800 | 800 |
| Thermal Conductiviey  | W/(m.k) | 25 | 27.5 | 2.5 | 20 | 1.68 |
| Thermal Expansion Coefficient  | 10-6/°C | 7.5 | 8 | 10 | 3.2 | 8.6 |
| Thermal Shock Resistance   | △T°C | 200 | 200 | 250 | 600 | 200 |
| Specific Heat  | J/kg.K | 860 | 860 | 500 | 500 |  |
| Electrical Specification   | ||||||
| Dielectric Strength   | KV/mm | 12 | 10 | 5 |  | 40 |
| Dielectric Constant  | εr | 9.5 | 9.1 | 12 | 6 | 7 |
| Volume Resistivity  | Ω | ≥1014 | ≥1014 | ≥1010 | ≥1014 | ≥1016 |
| Dielectric Loss Angle | Â | 0.0002 | 0.0002 | 0.001 | Â | Â |
Manufacturing Process
Packing and Shipping:
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com