According to reports, this multi-functional pure electric cleaning ship uses multiple digital variable frequency motors. The mechanical part is made of stainless steel anti-corrosion material, which can collect surface garbage, clean the dirt on the bank, and cut water and grass. It can be described as a boat.
It is understood that the current traditional surface waste treatment mainly relies on manual salvage, manual treatment is dirty and tired, and it is difficult to establish a foot on the river, which also brings a large work intensity to the cleaners. This multi-functional pure electric cleaning ship is a bell mouth at the front end of the ship, which is convenient for collecting surface garbage. When the garbage in the bell mouth reaches a certain amount, the conveying system can be started to transport the collected surface garbage into the garbage turnover box in the cabin. The work intensity of the water surface cleaning is greatly reduced.
The electric brooms on both sides of the front end of the ship can clean the revetments on both sides of the river. The side wheels on both sides of the front end can ensure that the ship and the revetment maintain a fixed distance to prevent the ship from colliding with the bank. The driver can clean the green grass, duckweed and garbage on the heavily polluted shore by simply operating the bridge. If the underwater water is too dense, it will cause great inconvenience to the navigation of the cruise ship. This problem is also difficult to avoid the cleaning ship with the grass cutting function. The electric scissors and the conveyor belt are activated, and the water grass is automatically collected in the cabin after being cut. The cruise ship will be able to travel unimpeded. This kind of cleaning boat has also been very successful in energy conservation and environmental protection. The boat can start the lifting system when driving alone, and raise the stainless steel collecting and conveying system to above the water surface to reduce the resistance and save energy. Compared with the conventional diesel propelled cleaning ship, the electric cleaning ship avoids the high fuel consumption, black smoke, bilge water and dirty oil of the diesel engine at low speed or rapid propulsion. The vessel has a speed of 0-10 km per hour and can work continuously for 6 hours.
About Yuchai sapre parts, we have valves. There are fuel cut off valve and fuel stop solenoid valve. A fuel shutoff solenoid is an electronic switch that automatically stops the fuel flow from the tank to the engine. The valve is normally in the open position; however, a loss of electrical power to the valve or activating a switch in the vehicle closes the valve to stop fuel flow. The fuel shutoff solenoid is located in the fuel pump, but the electronic switch is inside of the driver's compartment. Once the switch is activated, the flow of fuel stops, and the engine no longer operates. Many of these switches also have a manual override feature to shut off the fuel in the event of a power failure. The solenoids are useful in stopping fuel flow in the event of an accident.
Yuchai Spare Parts
Yuchai Brake Parts,Yuchai Pressure Sensor,Yuchai Speed Sensor,Yuchai Solenoid Valve
Quzhou Hipsen Vehicle Parts Co., Ltd , http://www.hbs-parts.com