Flotation preparation, let alone your plenary meeting?

The flotation agent is properly formulated before use, which plays an important role in improving the efficacy. The preparation method is mainly determined according to the nature of the medicament. The following methods are common: First, most of the aqueous solutions are prepared.

The flotation agent is properly formulated before use, which plays an important role in improving the efficacy. The preparation method is mainly determined according to the nature of the medicament, and the following methods are commonly used:

First, formulated into an aqueous solution

Most water-soluble agents are used in this way, usually in 5% to 10% or more dilute aqueous solutions. The solution should not be too thin, too thin and too large; but it should not be too concentrated. The concentration is too large. It is difficult to control the dosage correctly and it is not convenient to transport.

Second, adding solvent to prepare

Some insoluble or poorly soluble agents can be added to a special solvent and added. For example, the oleic acid dissolved in oil and then add the coal, it can be enhanced in dispersibility in the pulp, but also can enhance the role of oleic collector; baiyao may be dissolved in o-toluidine reused.

Third, the emulsification method

The fatty acid collector and diesel oil can be emulsified to increase their dispersion in the pulp and improve the efficiency. Commonly used emulsification methods are: strong mechanical agitation, steaming or ultrasonication, if the emulsifier is added, the effect is better. For example, tall oil and diesel oil can be added with emulsifier - alkyl aryl sulfonate. Many surface active substances can be used as emulsifiers.

Saponification

Fatty acid collectors are commonly prepared by this method. The iron ore flotation, oxidized paraffin often used with tall oil soap as collector. In order to improve the water solubility, about 10% sodium carbonate can be added to make the tall oil saponified, and added with hot water to heat the hot soap. Another example is oleic acid, which has poor water solubility, but after reacting with sodium carbonate to form sodium oleate, the water solubility is improved.

5. Formulated as a suspension or emulsion

For example, lime can be added with water to grind into lime milk.

6. Acidification

When a cationic collector (amine) is used, it is necessary to add hydrochloric acid or acetic acid to form an amine salt because of poor water solubility, and it can be dissolved in water.

Seven, the original liquid is added

Some of the agents have little solubility in water, and it is difficult to formulate a true solution or a stable emulsion, such as pine oil, cresol black, kerosene, etc., without having to prepare a solution, but directly adding the stock solution according to the amount.

For the preparation method of the water-soluble medicament, the medicament is generally dissolved in a container with a small amount of water, and after being dissolved, the water is gradually added to a desired concentration.

At the production site, for the convenience of preparation, a scale with a marked volume can be engraved on the dispensing tank, and a known dose of the medicament can be placed in the tank, and water is added to the position indicated by the scale to the concentration, and the mixture is stirred until completely. Dissolve and ready to use.

Whether the concentration of the drug reaches the standard can be measured by a densitometer.

Semi-electric Stacker


Akodi designs and manufactures our reliable semi electric stackers. It has high power lift motor to provide smooth lifting and lowering. Our semi-electric pallet Stacker gives a cost-effective solution for Material Handling Equipment. This semi electric forklift also has many safety features to ensure operator`s safety.

 

  • High power lift motor: smooth lifting and lowering, cost-effective
  • Forklift mast wheel, sprocket, chain, and bearings: increased work efficiency, eliminating costly repair
  • Parking brake: steady operation, ensured personnel safety
  • Removable masts and forks: lowering logistics costs, easy to repair and maintenance
  • Emergency stop: improves operator safety
  • Optional: adjustable front legs


Semi-electric Stacker

Measurement/ Model

AKCDSD10

AKCDSD20

AKCDSD30

Capacity (Q)

Kg

1000

2000

3000

Load center (C)

mm

500

500

500

Turning radius (Wr)

mm

1350

1350

1350

Max. lift height (h)

mm

1600/2000/2500

1600/2000/2500

1600

Min. height (h1)

mm

80

80

80

Fork size

mm

1070×160

1070×160

1070×160

Overall fork width

mm

680

680

680

Fork min. height

mm

25

25

25

Overall width (b1)

mm

780

780

780

Overall length (L)

mm

1655

1655

1655

Overall height (h4)

mm

2075/1575/1825

2075/1575/1825

2075

Battery capacity

V/A

12V/105 Ah

12V/105 Ah

12V/105 Ah

Charger

V/A

BC12V/15A(Internal)

BC12V/15A(Internal)

BC12V/15A(Internal)

Driving Method

 

Walk

Walk

Walk

weight

Kg

350-420

420-500

520

Semi-Electric Stacker

Semi Electric Stackers,Semi-Electric Pallet Stacker,Material Handling Equipment,Semi Electric Forklift

Akodi Intelligent Robot Technology Co., LTD , https://www.akodiforklift.com