Scientific instrument resources are precious resources for the progress of human society. Promoting the sharing and utilization of scientific instruments and equipment is of great significance to the smooth development of scientific and technological innovation in China. In recent years, China's large-scale sharing of scientific instruments has achieved great development in terms of quantity and quality.
The Xiamen Science Instrument Resource Sharing Platform is responsible for the construction, operation and maintenance of the Xiamen Pioneer Park. Through the portal of the platform, a large number of enterprise users can inquire and retrieve the equipment and equipment they need, and can make reservations for use through the website and the sharing unit of the instrument.
In terms of use, foreign users are registered on the National Dayi platform. Through the Xiamen City's scientific equipment and equipment resources sharing and sharing platform, all the equipment and equipment information shared by the platform can be accessed; users registered on this platform can directly log on to the National Instrument platform. Check, no additional registration required. As a construction, operation, and management unit, the Xiamen High-tech Innovation Center will also conduct corresponding docking work in accordance with the procedures of the National Taiyi Platform.
(Original title: Xiamen Science Instrument Resource Sharing Platform Completes National Networking Pair)
High Efficiency Spirotal Heat Exchanger
The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer.
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger`s helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger`s Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger`s Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spiral plate heat exchanger is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series
High Temperature Spiral Plate Heat Exchanger,Spirotal Heat Exchanger Equipment,Spiral Board Plate Heat Exchanger,Carbon Steel Spiral Plate Heat Exchanger
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com