Gas Generator Cheap Inverter Welder

Specification of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:

1. Energy-saving. Oil saving 20%, energy saving 40%. Consume water and electricity, electrolyze water into hydrogen gas and oxygen gas. Use H2 and O2 as source of flame replacing LPG, Propane, Acetylene fuel or natural gas or other fuel.

2. Environment-friendly. Consumption of water, it produces water. Compared with traditional fuel, and are more beneficial to the environment and human.

3.100% safe. Because the density of hydrogen is small, it will not be assembled on the ground, so there is no risk of explosion.

4. Save time & money. The temperature of the oxy-hydrogen flame is up to 2800 degrees Celsius, and the flame is more concentrated. Compared with conventional fuel, more save time and cost.

5. CE, SGS Certification


Multi-functions application of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:

1. Jewelry welding

2. Acrylic polishing(15mm)

3. Platinum resistor welding

4. Varnished wire welding

5. Waxy film repair

6. Thermocouple welding

Quartz glass tube sealing, water injection wire drawing sealing

7. Small copper pipe welding, etc.


Unique Patented &Systems features of water welding machine/HHO generator for welding/HHO welding machine:

1. Power Supply IGBT frequency conversion technology, conversion efficiency is as high as above 90%, stable and reliable to exchange AC turn to DC.

2. Electrolysis cell Integration formed electrolysis cell, no any gas and liquid leakage.

3. Electrolytic process, Dynamic self-circulation electrolytic process, purifier is installed in electrolyte circulation pipeline, it can clean the electrolysis cell automatically.

4. Electrolysis polar plate, Special activity alloy material surface treatment, low over potential and no leakage between the polar plates, the gas production efficiency is high.

5. Moisture separation system Centrifugal compulsive moisture separation device, can achieve Moisture separation 100%, and always keep blue flame.

6. Pipeline system seamless stainless steel tube, no any rubber hoses absolutely, no gas or liquid leakage, ensures the safety and reliability

7. Anti-backfire system Adopt patented wet-type anti-backfire and dry-type flashback arrestor and automatic safety valve device, build in automatically decompression and recover device, prevent from backfire, no need reset by manual.

8. Heat dissipation system Unique duct design and larger space for heat dissipation to meet the needs of the work for 24 hours under high temperature of 40 degrees in summer. 

9.Technical Data Sheet

Thank you for visiting. Any questions, please feel free to contact us. I am Huang Renhua here. 

Specification of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:

1. Energy-saving. Oil saving 20%, energy saving 40%. Consume water and electricity, electrolyze water into hydrogen gas and oxygen gas. Use H2 and O2 as source of flame replacing LPG, Propane, Acetylene fuel or natural gas or other fuel.

2. Environment-friendly. Consumption of water, it produces water. Compared with traditional fuel, and are more beneficial to the environment and human.

3.100% safe. Because the density of hydrogen is small, it will not be assembled on the ground, so there is no risk of explosion.

4. Save time & money. The temperature of the oxy-hydrogen flame is up to 2800 degrees Celsius, and the flame is more concentrated. Compared with conventional fuel, more save time and cost.

5. CE, SGS Certification


Multi-functions application of oxy-hydrogen flame enameled wires welding machine/oxy-hydrogen welding machine:

1. Jewelry welding

2. Acrylic polishing(15mm)

3. Platinum resistor welding

4. Varnished wire welding

5. Waxy film repair

6. Thermocouple welding

Quartz glass tube sealing, water injection wire drawing sealing

7. Small copper pipe welding, etc.


Unique Patented &Systems features of water welding machine/HHO generator for welding/HHO welding machine:

1. Power Supply IGBT frequency conversion technology, conversion efficiency is as high as above 90%, stable and reliable to exchange AC turn to DC.

2. Electrolysis cell Integration formed electrolysis cell, no any gas and liquid leakage.

3. Electrolytic process, Dynamic self-circulation electrolytic process, purifier is installed in electrolyte circulation pipeline, it can clean the electrolysis cell automatically.

4. Electrolysis polar plate, Special activity alloy material surface treatment, low over potential and no leakage between the polar plates, the gas production efficiency is high.

5. Moisture separation system Centrifugal compulsive moisture separation device, can achieve Moisture separation 100%, and always keep blue flame.

6. Pipeline system seamless stainless steel tube, no any rubber hoses absolutely, no gas or liquid leakage, ensures the safety and reliability

7. Anti-backfire system Adopt patented wet-type anti-backfire and dry-type flashback arrestor and automatic safety valve device, build in automatically decompression and recover device, prevent from backfire, no need reset by manual.

8. Heat dissipation system Unique duct design and larger space for heat dissipation to meet the needs of the work for 24 hours under high temperature of 40 degrees in summer. 

9.Technical Data Sheet

Thank you for visiting. Any questions, please feel free to contact us. I am Huang Renhua here. 

Cobalt Based Alloy Powder

Cobalt-based alloy powders are commonly used in plasma transfer arc welding (PTAW) due to their excellent high-temperature properties and resistance to wear and corrosion. These alloys are typically composed of cobalt as the base metal, with various alloying elements such as chromium, tungsten, nickel, and carbon added to enhance specific properties.

The use of cobalt-based alloy powders in PTAW offers several advantages, including:

1. High-temperature strength: Cobalt-based alloys exhibit excellent strength and resistance to deformation at elevated temperatures, making them suitable for welding applications that involve high heat.

2. Wear resistance: These alloys have a high hardness and resistance to wear, making them ideal for welding applications where the welded parts are subjected to abrasive or erosive conditions.

3. Corrosion resistance: Cobalt-based alloys offer good resistance to corrosion, making them suitable for welding applications in aggressive environments, such as those involving chemicals or saltwater.

4. Thermal conductivity: Cobalt-based alloys have good thermal conductivity, allowing for efficient heat transfer during welding and reducing the risk of heat-affected zone (HAZ) defects.

5. Compatibility with other materials: Cobalt-based alloys can be easily welded to a wide range of base metals, including stainless steels, nickel alloys, and other cobalt-based alloys, providing versatility in welding applications.

To use cobalt-based alloy powders for PTAW, the powder is typically fed into the plasma arc using a powder feeder. The powder is then melted by the high-temperature plasma arc and deposited onto the workpiece, forming a weld bead. The specific welding parameters, such as arc current, travel speed, and powder feed rate, will depend on the specific alloy and application requirements.

It is important to note that the selection of the cobalt-based alloy powder should be based on the specific welding application and the desired properties of the final weld. Different cobalt-based a

Co Powder,Cobalt 6 Powder,Cobalt 12 Powder,Cobalt 21 Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.egretgeotools.com