Stacked gate, also known as stacked beam valve, stacked beam door is the use of multiple separate gate, each block transversely into the door slot stacked into a flat water retaining structure. Girder gate to rely on their own weight and rubber water stop to achieve the purpose of sealing. Generally consists of more than two overlapping gate made of. In the next gate or gate, a piece into a piece or taken out, the use of lower frequency, but the overall light, not easy to deformation, even if idle for a long time before use, to ensure good sealing effect, without water leakage. The height of each ram must be the same, each block is basically the same shape, each block has raised and groove (or mouth), bumps and grooves inlaid with water tape, so that can be stacked one by one Get up to the level you need, with little or no leakage. Each ram also has two pull rings, easy to drop or remove. Slotted steel plate folded into [trough shape, and the channel embedded steel welded installation. Rely on the stack brake installed on the spring and the role of water pressure, water tight rubber seal with the gate close fit, sealing effect is good.
Girder gate installation diagram
Girder gate installation diagram
Girder gate Features: Girder gate installed in the channel, the use of manual stacking beams quickly into the channel, with
Insert, lift convenient, light weight, sealed, good strength, long life, easy maintenance and so on.
Stacking valve product performance: working head less than 5 meters.
Applicable medium: sewage, water, sea water and so on
Girder gate main parts material:
Door slot: stainless steel, carbon steel
Girder: stainless steel, carbon steel, aluminum alloy
Sealed: water stop rubber
Girder gate main material:
Stacking valve overall material for the Q235, the thickness and strength of the steel to ensure that in the transport and installation process, no damage, no deformation, if damaged, to be reliably repaired. Strip fitting firm, long-term use does not fall off or fracture aging. Pull ring is also solid and reliable, repeated use is not loose.
Girder gate main technical parameters:
Product Name: Stacked gate, stacked beam gate, stacked beam valve
Product Type: DLZ
Product Specifications: 200 * 200-3000 * 3000
Usage: Stacked gate widely used in sewage treatment plants, water plants, power plants and other industries. Used for interception.
Product performance: working head less than 5 meters.
Applicable medium: sewage, water, sea water and so on
Battery Handling Flatbed Truck
1. The cost of direct handling can be reduced by more than 25% compared with manual handling.
2. The cargo unit can be increased to save handling time.
3. Reduce the damage of handling items and improve the success rate of products.
4. Increase the stacking height and improve the utilization of stacking space.
5. Hydraulic transporter reduces labor intensity and improves working conditions.
6. Good mobility and diversified working performance, reduce other loading and unloading equipment and reduce the investment of the whole handling facilities
Battery Handling Flatbed Truck,Motorized Flatbed Cart,Loading Dock Plate,Wharf Material Handling Flatbed
Jiangsu Anli Electric Vehicle Co. Ltd , https://www.anlitractor.com