It is very important that the brake pads are safe for both the car and the car, and the car brake is a component that will be used in driving. Then the car owners know how to maintain the brake pads? Today's article will tell you in detail how to maintain the brake pads.
In the life, the car brakes help to stop the car. On the contrary, if a car only advances and does not stop, then I think no one dares to do such a car, and no one dares to open, so it seems that the car brake is not It is very important, in fact, the brakes of the car are mainly controlled by the brake pads. Then how do the brake pads of the owners of the car be maintained? Today, I will take the car owners together to study.
Brake pad maintenance
In fact, in general, the brake system plays a vital role in the safety of the vehicle. Any negligence may cause an accident. Today's editors talk about how to maintain the brakes, the owner can look at the actual situation of their car to see if there is a need to replace. I believe that each owner understands the brakes well. Disc brakes are generally composed of two parts: iron linings and friction materials. Each brake pad has a limit thickness, do not wait until the friction material is quickly worn out before replacing the shoe, which is very dangerous.
Some cars now have a brake shoe alarm function. Once the brake pad reaches the wear limit, the car's instrument will alarm, prompting the owner to replace the shoe. The shoe that has reached the limit of use must be replaced. Even if it can be used for a period of time, it will reduce the effect of braking and affect the safety of driving.
Brake pad replacement
The car owners must also pay attention to the normal replacement of the first time can be 60,000 -7 million kilometers, some vehicles have warning lights (usually high-end car equipped with) will remind you need to replace the brake pads. When the friction material on the brake pad rubs against the steel back warning line, a squealing noise will be heard and this time it needs to be replaced immediately.
When the owner replaces the brake pads, it is best to replace the brake pads provided by the original spare parts. In this way, the braking effect between the brake pads and the brake discs will be the best, the wear will be minimal, and the service life will be the longest. The failure occurred. After replacement, be sure to step on the brakes to eliminate the gap between the shoe and the brake disc, so as not to cause the first foot to brake.
In addition, when replacing the shoe, it is also necessary to use a special tool to push the brake cylinder back so that it can be easily operated. It cannot be directly pressed back with other crowbars. This can easily cause the brake caliper guide screws to bend and brake. Die stuck, eventually causing brake damage.
Tips: The above is what I said for everyone today about how to maintain the brake pads. I hope this article can help baby owners.
CNC bending is a process where sheet metal is bent to an angle using, typically a V shaped punch and die. The sheet is placed between the punch and die which presses down on the sheet. This method of bending provides a low cost method to product 3D shapes from 2D sheets. CNC bending is a suitable for processing most ductile metals and primarily for sheet metal designs with one or more bends. Just a few examples of are brackets, enclosures, cams, chassis, etc. There is generally no special tooling required, with the exception of intricate designs and special bends.
Cnc Bending,Cnc Bending Machine,Cnc Pipe Bender,Cnc Wire Bender
Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com