In the process of using wireless devices such as wireless bridges, users often have some weak signal problems. This situation will cause trouble and unnecessary loss to the users more or less. Regarding the weak signal, in addition to external reasons, There are internal reasons, how to solve it still needs to start from these two aspects, the following small series will tell you why the wireless bridge transmission signal is weak and how to solve it.
1. Transmission performance above industrial grade
Outdoor wireless bridge transmission performance is very important, usually in the harsh outdoor environment, rain, climate and other factors will affect the transmission signal, so in this case, the civilian-grade wireless bridge and industrial-grade wireless bridge performance compared The signal stability will be much worse.
2, dustproof and rainproof
Outdoor wireless bridges are the most basic standard for dustproof and rainproof. Outdoor environment dust and rain are often encountered. If the dustproof and waterproof effect is not good, dust or rain will seep into the wireless bridge casing. In turn, the internal circuit board of the wireless bridge is caused to be short-circuited, burned, and the like.
3, heat and cold resistance
In an outdoor environment, wireless bridges are subject to hot summers and cold winters, and poor quality wireless bridges are difficult to work in this environment. Therefore, the outdoor wireless bridge must have the standard of heat and cold resistance.
4, lightning protection
Outdoor wireless bridges will inevitably not touch direct lightning and inductive lightning. Once the lightning protection is not done well, it will be extremely serious damage to the equipment.
5, wireless bridge angle deviation
Everyone knows that wireless bridges are point-to-point transmission methods. Under the premise of directional antenna alignment angle, the signal can reach a good state. The farther the transmission distance is, the higher the accuracy of the angle is.
6. Interference from same frequency equipment
The wireless bridge frequency is divided into 2.4G and 5.8G. The 2.4G frequency wireless bridge develops earlier, and it is easy to encounter signal interference of such same frequency equipment, resulting in signal weakening. It is therefore recommended to use a 5.8G wireless bridge to reduce interference.
7, obstacle interference
Sometimes because of the project needs, some buildings or facilities need to be built between the transmitting end and the receiving end, which may cause the signal to weaken or be interrupted. The solution at this time is to avoid these obstructions. The common methods are to increase the wireless bridge and increase the relay point.
In summary, in order to solve the problem of weak signal, in addition to the wireless bridge itself has good performance, the targeted deployment control scheme is also very important. Therefore, it is very important to choose a strong wireless bridge provider. Every product of Tengyuan Zhituo Wireless Bridge has industrial quality, and has professional technology and after-sales team to escort the product, it is worthy of your peace of mind.
Excavators are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house".[1] The house sits atop an undercarriage with tracks or wheels. They are a natural progression from the steam shovels and often mistakenly called power shovels.[citation needed] All movement and functions of a hydraulic Excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.[2] Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators which use winches and steel ropes to accomplish the movements.[3]
Excavator parts include Excavator extended arm, extended arm standard bucket, rock bucket, reinforced bucket, wood grabber, ripper, excavator oil cylinder, breaker, bucket teeth, tooth seat, crawler, supporting roller, roller, hydraulic pump, distribution Valve, center slewing, slewing bearing, travel drive, cab, control valve, relief valve, main control multi-way valve, starter motor, display screen, guide wheel, idler roller, drive tooth, chain, slewing bearing , Crawler, Tensioner, Main Oil Seal, Cylinder Repair Kit, Hydraulic Cylinder, Bucket Cylinder
Excavator Parts,Hitachi Excavator Parts,SANY Excavator Parts,Komatsu Excavator Parts
Shandong Vio Machinery co.,ltd. , https://www.shantui-xcmgparts.com