Model NO.: DSG-01, DSG-03, 4WE6, 4WE10 Series
Power Supply: AC and DC
Usage: Direction Control
Standard: GB
Application: Industrial Usage
Max.Pressure: 31.5MPa
Max.Flow(DSG-01,4we6): 63L
Max.Flow(DSG-03,4we10): 120L
Trademark: Seric
Transport Package: Carton Box/Wooden Case
Specification: DSG-01, DSG-03, 4WE6, 4WE10
Origin: Guangzhou
HS Code: 8413910000
FeaturesThese are epoch-making solenoid operated directional valves of high pressure, high flow which have been developed incorporating a unique design concept into every part of the valve including the solenoid. With wet type solenoids, these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valve.
Stable Operation
With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation.
Solenoids
Solenoid Connectors (DIN connector)
The solenoid connectors are conform to the international standard ISO 4400 (Fluid power systems and components-Three-pin electrical plug connectors Characteristics and requirements)
AC Solenoids
50 to 60 Hz common service solenoids do not require rewiring when the applied frequency is changed.
DC Solenoids (Reputable K-series)
These DC solenoids have surge absorbers for K-series functions. The three advantages of them are as mentioned below:
1. Since surge voltage can be controlled to a very low figure, electric control devices, such as a computer, can be used without any interference like noise.
2. There being no spark between contacts, the life of the relay becomes longer.
3. Time lag for spool return after de-energisation of the solenoid is very short.
| DSG-01-3C2 DSG-01-3C3 DSG-01-3C4 DSG-01-3C9 DSG-01-3C60 DSG-01-3C10 DSG-01-3C12 DSG-01-2D2 DSG-01-2B2 DSG-01-2B3 DSG-01-2B8 Â |
DSG-03-3C2 DSG-03-3C3 DSG-03-3C4 DSG-03-3C60 DSG-03-3C10 DSG-03-3C12 DSG-03-2D2 DSG-03-2B2 DSG-03-2B3 DSG-03-2B8 Â |
| 4WE6E 4WE6H 4WE6J 4WE6Q 4WE6G 4WE6M 4WE6L 4WE6D 4WE6A 4WE6Y 4WE6B 4WE6-D/OF |
4WE10E 4WE10H 4WE10J 4WE10Q 4WE10G 4WE10M 4WE10U 4WE10L 4WE10D 4WE10A 4WE10Y 4WE10B 4WE10-D/OF |
Specifications
| Valve Type |
Model Numbers |
Max. Flow L /min (U.S.GPM) |
Max. Operating Pressure MPa (PSI) |
Max. T-Line Back Pres. MPa (PSI) |
Max. Changeover Frequency min-1 (Cycles/Min) |
Approx. Mass (kg) |
|
Standard Type |
DSG-01-3C∗-∗-50 | 63 (16.6) |
31.5 (4570) {Spool Type 60 Only 25 (3630)} |
16 (2320) |
300 {R Type Sol. Only} 120 |
2.2 |
| DSG-01-2D2-∗-50 | 2.2 | |||||
| DSG-01-2B∗-∗-50 | 1.6 | |||||
|
Shock less Type |
S-DSG-01-3C∗-∗-50 | 40 (10.6) | 16 (2320) | 16 (2320) | 120 | 2.2 |
| S-DSG-01-2B2-∗-50 | 1.6 |
| Valve Type | Electric source |
Coil Type |
Frequency (Hz) |
Voltage (V) | Current & Power at Rated Voltage | |||
| Source Rating | Serviceable Range | Inrush (A) | Holding (A) | Power (W) | ||||
|
Standard Type  Shock less Type |
AC | A100 | 50 | 100 | 80 - 110 | 2.42 | 0.51 | ― |
| 60 | 100 | 90 - 120 | 2.14 | 0.37 | ||||
| 110 | 2.35 | 0.44 | ||||||
| A120 | 50 | 120 | 96 - 132 | 2.02 | 0.42 | |||
| 60 | 108 - 144 | 1.78 | 0.31 | |||||
| A200 | 50 | 200 | 160 - 220 | 1.21 | 0.25 | |||
| 60 | 200 | 180 - 240 | 1.07 | 0.19 | ||||
| 220 | 1.18 | 0.22 | ||||||
| A240 | 50 | 240 | 192 - 264 | 1.01 | 0.21 | |||
| 60 | 216 - 288 | 0.89 | 0.15 | |||||
|
DC (K Series) |
D12 | ― | 12 | 10.8 - 13.2 | ― | 2.45 | 29 | |
| D24 | 24 | 21.6 - 26.4 | 1.23 | |||||
| D48 | 48 | 43.2 - 52.8 | 0.61 | |||||
| AC→DC    Rectified (R) | R100 | 50/60 | 100 | 90 - 110 | ― | 0.33 | 29 | |
| R200 | 200 | 180 - 220 | 0.16 | |||||
Model Number Designation
| F- | S- | DSG | -01 | -2 | B | 2 |
|
Special Seals |
Shock less Type |
Series Number |
Valve Size |
Number of Valve Positions |
Spool- Spring Arrangement |
Spool Type |
|
F; For Phosphate Ester Type Fluids (Omit if not Required) |
None: Standard Type |
DSG: Solenoid Operated Directional Valve |
01 | 3 |
C: Spring Centered |
2,3,4, 40,60,9 10,12 |
| 2 |
D: No-Spring Detened |
2 | ||||
|
B: Spring Offset |
2, 3, 8 |
|||||
|
S: Shock less Type |
3 |
C: Spring Centered |
2 4 |
|||
| 2 |
B: Spring Offset |
2 |
Â
| A | -D24 | -C | -N | -50 | -L |
|
Special Two Position Valve (Omit if not Required) |
Coil Type |
Manual Override |
Electrical Conduit Connection |
Design Number |
Models with Reverse Mtg. of Solenoid (Omit if not required) |
| ― |
AC: A100 A120 A200 A240 DC: D12 D24 D48 R: (AC→DC) R100 R200 |
None: Manual Override Pin C : Push Button and Lock Nut (Option) |
None: Terminal Box Type  N: Plug-in Connector Type N1: Plug-in Connector Type with Indicator Light (Option) |
50 | ― |
| ― | ― | ||||
|
A B |
L | ||||
| ― |
DC: D12 D24 D48 R: (AC→DC) R100 R200 |
― | |||
| ― | L |
Â
Mitsubishi Automatic Door System
Elevator Automatic Door,Sliding Elevator Door,Lift Landing Door
Lefeng Elevator Parts Co., Ltd. , http://www.szelevator.com