Introduction to Flood Prevention Technology for Parking Barrier System

The phenomenon of vehicles being smashed in the parking lot entrances and exits is not uncommon. As a parking lot system manufacturer, it often receives such feedback from customers. Regardless of technical or management reasons, such tangled issues have arisen. The safety of the barrier system is more and more important. The flood prevention technology for parking lot barrier systems can be summarized as follows:

First of all, the most common is that the earliest parking lot anti-smashing technology is detected through the sense coils. When the vehicle detector detects the ground sense trigger signal, the bar will be lifted, and when the vehicle passes the ground sense, the ground The signal disappears and the barrier will automatically drop the lever. The shortcoming of this flood prevention technology is that it does not have the function of flood prevention. It requires separate management of people and cars at the entrance and exit of the parking lot.

Secondly, the pressure wave flood prevention technology, this flood prevention technology is mainly through the installation of a resistance-resistance return device to control the access barriers, when the access barriers come in contact with the vehicles or pedestrians, the rubber at the bottom of the barriers. If the article is subjected to resistance, it will automatically change to a rising state, which will prevent the brake from being dragged.

In addition, infrared flood prevention technology, this way of flood prevention is installed on both sides of the entrance and exit barrier infrared device, in the fall of the barrier rod, when a vehicle enters, infrared receives the resistance, The brake lever will automatically rise and the response will be relatively rapid, but the infrared radiation range is small, and it may be disturbed by rain and snow, and the use range is limited.

Finally, it is digital flood prevention technology. Compared with several other flood prevention technologies, this technology has higher safety, and of course, the cost is relatively high. The digital automatic detection of flood prevention vehicle technology eliminates the need for other auxiliary protection devices to accurately collect gates in real time. The rod runs data to monitor the operation. Once it is blocked during operation, the brake lever will rise quickly.

The car parking barrier system's anti-smashing function has always been valued by people. According to the installation site, different flood prevention modes need to be selected.

More information about the license plate recognition system, parking lot management system, parking lot charging system, parking lot barrier, access gate system, cloud parking lot and other functions. For details, please contact Shenzhen Daoer Intelligent Control Technology Co., Ltd., China Smart Parking The first share of the cloud platform, the preferred partner of the parking lot operator.

2 Ton Electric Stacker

1. Multifunctional handle
The multifunctional handle is imported from Germany. It has integrated control functions including a speed button, horn button, emergency reversing button and lifting button. The handle has an emergency reversing button which can effectively protect the operators from being hurt in accident involving falling items. The handle can realize braking both in vertical and horizontal position. The human-machine design is quite safe and the operation is more comfortable.

2. Strong power
This stacker adopts high efficiency motor which can be precisely controlled and the output power is strong. The turning control can be optionally equipped with EPS. It can help the driver with turning by using electronic control device to produce auxiliary power of relative level and direction according to the torque signal and speed signal. So the operation of the driver can be more convenient and precise and the movement can be more stable and reliable.

3.Superior gradeability
The powerful motor and 5 wheel stacker structure can provide superior stability and gradeability, so that the truck can have sufficient gradeability when it is fully loaded.

4. Buffered pedal
The foldable pedal can save space when the stacker is not in use. It can also effectively protect the drivers from being effected by the bumping and give feedback to the driver with the road condition.

5. Dual balance wheel device
This stacker is equipped with a dual balance wheel so that it can overcome roadblocks easier and the running can be more stable.

6. Emergency power-off switch
The power can be rapidly cut off in emergency to ensure safety.

Electric Stacker, or walkie stacker, is an industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries, as well as ports, railways, freight yards, warehouses.

Compared with the traditional manual stacking, Zowell full electric stacker maintains great advantages in safety, efficiency and cost. In addition to durability and accuracy both outside and inside, Zowell XE electric stackers are also equipped with mast with clear view, double speed and lateral vertical moving switch, which are valuable when working in limited space.

The standard load capacity of XE series ranges from 1 ton to 2 tons, two driving modes: walking and standing driving. If you need bigger capacity or other customized options such as rod, low mast, grabbling frame, please contact us so that we can provide you best solution with professional knowledge.

Full Electric Stacker,Electric Stacker Truck,Electrical Stacker,Electric Stacker Lifter

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com