Metal Tube Laser Cutting Machine Price

Metal tube and plate fiber laser cutting machine 


1. The whole machine is fully enclosed to reduce laser radiation and prevent mechanical damage.
2. Exchange worktable, save loading and unloading time, and improve work efficiency
3. High-precision grinding grade gears, racks, low noise, high precision and fast speed
4.SMC pneumatic components, intelligent control, perfect low pressure perforation
5. High-strength integral welding body, cast aluminum X axis and high temperature annealing to ensure that         the machine tool will not be deformed after 20 years of normal use.
6. It is driven by world class precision ball screw/rack and linear guide to achieve high precision, high                  efficiency and stability of the machine.
7. Equipped with the most advanced wireless handheld terminal for remote processing device
8. The equipment adopts high-performance numerical control system, AC servo motor and drive. It is a                  integrating advanced technologies such as pneumatic, mechanical, optoelectronic and numerical control.
 











 

 

 

 

A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The term "laser" originated as an acronym for "light amplification by stimulated emission of radiation"
For more please visit https://en.wikipedia.org/wiki/Laser
  Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications,
Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
For more please visit https://en.wikipedia.org/wiki/Laser_cutting
  It is fiber laser cutting machine, wavelength is 1064nm, good for metal cutting.
  It will be a long story, Fiber laser good at cutting metal, the wavelength is of co2 laser and fiber laser are different, the wavelength of fiber laser is around 1064nm and co2 laser is 10640nm, the absorption rate is influenced by the wavelength of the laser, please review below photo.



 Normally we use Co2 laser 60-150w for cutting nonmetallic materials such as wood, acrylic, leather, fabric etc., if the co2 laser power up to 1kw-5kw it could use for cutting metal too.
And, we offer fiber laser 500w -1.5kw for cutting different metal material, such as stainless steel, carbon steel, Iron, brass, Aluminum etc.
  Very good, we can say the fiber laser is born for metal cutting because metal have high absorption rate of fiber laser, and it is cost of running much lower than high power Co2 laser.
  Absolutely not, it is safe, we designed the machine in 8 aspects (Security, Culture, Value, Aesthetic, Quality, Service, Save, Experience), the Security will be always the priority and the most important thing we need to be consider. The radiation of the fiber laser cutting machine is similar to that of the computers, mobile phones, televisions and copiers.
  "fiber laser revenues cracked the $2 billion level, turning in a 34% increase over 2016."
The revenue growth of high power fiber lasers, used heavily in sheet metal cutting, lifted this laser technology to 47% of total industrial laser sales in 2017. Couple this with laser metal cutting representing 35% of all laser revenues, and it becomes obvious why laser metal cutting, a key component in the fabricated metal product sector of manufacturing used throughout the world, is a metric in a country's gross domestic product (GDP) For the machine just about the cost of the machine, the cost shipping
For the whole project, need to invest for the factory and the infrastructure of the factory, such as the Electricity system, gas system, gantry crane, and the team.
  The CNC punching is good for simple design, for example if you have many circle holes need to cut, then CNC punching will be faster,
Laser cutting is ok for any design and any thickness metal sheet cutting, it is an ideal for creating shapes with a number of small features, curves and details. Most of the fabrication center we can find both laser machine and CNC punching, sometime not just one.
  Cost of Machine: European Fiber Laser>Water jet>Plasma
Operating Cost: Water Jet>Laser>Plasma
Cutting Quality (Result): Plasma>Laser>Water Jet
Precision: Water Jet>Laser>Plasma
Fiber laser cutting:
Is better for cutting metal, Thick steel cost more, High precision.
Plasma cutting:
No matter cutting Thin steel or Thick steel, but cutting quality
water jet cutting:
Almost cut Everything, but very slowly.
  Most of the fabricator use it to cut Stainless steel, Carbon Steel, Mild Steel, Iron, galvanized steel, sometimes they cut Aluminum and brass too,
And some customer uses it to cut gold, silver for jewelry production.

13.What is the cost of the lasers?
Our fiber laser unit is the IPG, Raycus or Max and that system starts from $50,000 (US price)--a worthy investment for such a powerful piece of machinery!
The cost of our various laser systems is determined by power (500w, 800w, 1000w, 1500w, 2000w,etc.), cutting table size, and foundation (cutting sheet, or pipe, or both).

14. Can I make money with the laser?
Sure! Metal processing products is in high demand. Adding a laser engraving service to your current operation is an excellent way to reach possible new customers as well as offer a valued service to your current client base. 

15. How long does it take to learn to use the laser?
If you know how to use graphic design software, you can be up and running in minutes! There is no difficult software to learn as the operation software is so easy. 
It will take a bit of trial and error to learn what speed and power settings to use with different materials, but we include a comprehensive guide with your system that has recommended speed and power settings for various materials with which you will be working.

16. What types of graphics can I cut ?
To cut, you will need a vector based graphic, such as an .dxf or .dwg file. 

17.Can GYC's lasers cut metal?
Yes! Our fiber laser machine is special and professional for cutting metallic materials, including stainless steel, carbon steel, mild steel, alloy steel, silicon steel, galvanized sheet, etc.

18. Do I need separate laser systems for engraving and cutting?
No, one laser does it all! Our fiber laser systems will engrave and cut the metallic materials, as well as cut coated metals. The laser knows what portions to engrave and what portions to cut based on the setting, which is easily set in the operation software.

19.With what software are the laser systems compatible?
You can design your files in many different graphic software packages including CorelDraw, Illustrator, AutoCAD, and much more. AutoCAD is the most commonly used software, but the laser works with many different packages.

 

Welcome to visit our factory in Canton!

 
Metal tube and plate fiber laser cutting machine 


1. The whole machine is fully enclosed to reduce laser radiation and prevent mechanical damage.
2. Exchange worktable, save loading and unloading time, and improve work efficiency
3. High-precision grinding grade gears, racks, low noise, high precision and fast speed
4.SMC pneumatic components, intelligent control, perfect low pressure perforation
5. High-strength integral welding body, cast aluminum X axis and high temperature annealing to ensure that         the machine tool will not be deformed after 20 years of normal use.
6. It is driven by world class precision ball screw/rack and linear guide to achieve high precision, high                  efficiency and stability of the machine.
7. Equipped with the most advanced wireless handheld terminal for remote processing device
8. The equipment adopts high-performance numerical control system, AC servo motor and drive. It is a                  integrating advanced technologies such as pneumatic, mechanical, optoelectronic and numerical control.
 











 

 

 

 

A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The term "laser" originated as an acronym for "light amplification by stimulated emission of radiation"
For more please visit https://en.wikipedia.org/wiki/Laser
  Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications,
Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
For more please visit https://en.wikipedia.org/wiki/Laser_cutting
  It is fiber laser cutting machine, wavelength is 1064nm, good for metal cutting.
  It will be a long story, Fiber laser good at cutting metal, the wavelength is of co2 laser and fiber laser are different, the wavelength of fiber laser is around 1064nm and co2 laser is 10640nm, the absorption rate is influenced by the wavelength of the laser, please review below photo.



 Normally we use Co2 laser 60-150w for cutting nonmetallic materials such as wood, acrylic, leather, fabric etc., if the co2 laser power up to 1kw-5kw it could use for cutting metal too.
And, we offer fiber laser 500w -1.5kw for cutting different metal material, such as stainless steel, carbon steel, Iron, brass, Aluminum etc.
  Very good, we can say the fiber laser is born for metal cutting because metal have high absorption rate of fiber laser, and it is cost of running much lower than high power Co2 laser.
  Absolutely not, it is safe, we designed the machine in 8 aspects (Security, Culture, Value, Aesthetic, Quality, Service, Save, Experience), the Security will be always the priority and the most important thing we need to be consider. The radiation of the fiber laser cutting machine is similar to that of the computers, mobile phones, televisions and copiers.
  "fiber laser revenues cracked the $2 billion level, turning in a 34% increase over 2016."
The revenue growth of high power fiber lasers, used heavily in sheet metal cutting, lifted this laser technology to 47% of total industrial laser sales in 2017. Couple this with laser metal cutting representing 35% of all laser revenues, and it becomes obvious why laser metal cutting, a key component in the fabricated metal product sector of manufacturing used throughout the world, is a metric in a country's gross domestic product (GDP) For the machine just about the cost of the machine, the cost shipping
For the whole project, need to invest for the factory and the infrastructure of the factory, such as the Electricity system, gas system, gantry crane, and the team.
  The CNC punching is good for simple design, for example if you have many circle holes need to cut, then CNC punching will be faster,
Laser cutting is ok for any design and any thickness metal sheet cutting, it is an ideal for creating shapes with a number of small features, curves and details. Most of the fabrication center we can find both laser machine and CNC punching, sometime not just one.
  Cost of Machine: European Fiber Laser>Water jet>Plasma
Operating Cost: Water Jet>Laser>Plasma
Cutting Quality (Result): Plasma>Laser>Water Jet
Precision: Water Jet>Laser>Plasma
Fiber laser cutting:
Is better for cutting metal, Thick steel cost more, High precision.
Plasma cutting:
No matter cutting Thin steel or Thick steel, but cutting quality
water jet cutting:
Almost cut Everything, but very slowly.
  Most of the fabricator use it to cut Stainless steel, Carbon Steel, Mild Steel, Iron, galvanized steel, sometimes they cut Aluminum and brass too,
And some customer uses it to cut gold, silver for jewelry production.

13.What is the cost of the lasers?
Our fiber laser unit is the IPG, Raycus or Max and that system starts from $50,000 (US price)--a worthy investment for such a powerful piece of machinery!
The cost of our various laser systems is determined by power (500w, 800w, 1000w, 1500w, 2000w,etc.), cutting table size, and foundation (cutting sheet, or pipe, or both).

14. Can I make money with the laser?
Sure! Metal processing products is in high demand. Adding a laser engraving service to your current operation is an excellent way to reach possible new customers as well as offer a valued service to your current client base. 

15. How long does it take to learn to use the laser?
If you know how to use graphic design software, you can be up and running in minutes! There is no difficult software to learn as the operation software is so easy. 
It will take a bit of trial and error to learn what speed and power settings to use with different materials, but we include a comprehensive guide with your system that has recommended speed and power settings for various materials with which you will be working.

16. What types of graphics can I cut ?
To cut, you will need a vector based graphic, such as an .dxf or .dwg file. 

17.Can GYC's lasers cut metal?
Yes! Our fiber laser machine is special and professional for cutting metallic materials, including stainless steel, carbon steel, mild steel, alloy steel, silicon steel, galvanized sheet, etc.

18. Do I need separate laser systems for engraving and cutting?
No, one laser does it all! Our fiber laser systems will engrave and cut the metallic materials, as well as cut coated metals. The laser knows what portions to engrave and what portions to cut based on the setting, which is easily set in the operation software.

19.With what software are the laser systems compatible?
You can design your files in many different graphic software packages including CorelDraw, Illustrator, AutoCAD, and much more. AutoCAD is the most commonly used software, but the laser works with many different packages.

 

Welcome to visit our factory in Canton!

 

Electric Scooter

Electric Scooter For Kids,Electric Scooter Adult,Electric Scooter With Seat,Electric Riding Scooters

Wu Xi Mdka New Energy Technology Co., Ltd. , https://www.evmdka.com