1. adopts conical twin screw extruderÂ
2. suitable for PVC ceiling/wall panel
Advantages of PVC ceiling:
1.100% Water proof, Moisture proofÂ
2.Wall Panel are 100% Damp proofÂ
3.No splitting, cracking, warping or rotting.
4.No painting or varnishing
5.Wall Panel are Light in weightÂ
6.Consistency in qualityÂ
7.Easy to install Time and labor savingÂ
8.High durabilityÂ
9.Wall Panels are Wide range colorÂ
10.High aesthetic appealÂ
11.Reusable
PVC ceiling production line used to produce PVC ceiling wall panel with different size, such as 200mm, 250m,300mm, 400mm, 600mm , and Thickness: 5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, and so on.
Production flow of PVC ceiling production line:
Material batching mixing-extruding-molding-vacuum calibrating and cooling-hauling-cutting- final UPVC wall panel
Surface treating ways:
- lamination
The main machines needed for PVC ceiling:
-PVC mixer
-PVC panel extrusion line
(Including autoloader, conical twin screw extruder, mould, vacuum calibration chamber, hauling machine, auto cutter- stacker)
- Lamination machine
- PVC crusher& PVC miller
- Air compressor
- Water chiller (optional)
The popular model of PVC ceiling production line:
Popular Model |
YF-300 |
YF-600 |
Extruder |
SJZ51/105 |
SJZ65/132 |
suitable size of panel |
160mm,200mm,250mm,300mm |
250mm,300mm,400mm,600mm |
Max capacity(kg/h) |
about 100 |
about 200 |
production line speed |
3.5-5m/min |
|
Â
The swivel joint connectors are specifically designed for overhead line stringing, these swivels are reliable, heavy duty product with adequate load rating for tension stringing, yet small enough in diameter to pass through conductor stringing blocks. Swivel joint connectors should never be passed through bullwheels. Be sure to check the diameter of the swivel against the dimension on the blocks, etc. Swivel joint connectors are precision machined, alloy steel and heat-treated for maximum strength and wear, and should be compatible with the strengths of pulling line and grips. Swivel joint connector is suitable for connecting traction wire rope when laying out wire of various specifications, which can release the twisting strength of wire rope.
Swivel connector is a special connecting tool for overhead transmission line stringing construction. It is used to connect traction rope and ground wire, main traction rope and guide rope in the traction and laying process, or the new coil head and the old coil tail when the conductor is changed, and eliminate the torque. The swivel connector can be directly connected with the traction rope and the grounding wire, or through the traction plate. The swivel connector can rotate freely in the positive and negative directions under the load-bearing state, which has the characteristics of small volume, light weight, light height, convenient assembly and disassembly, and can reduce the damage of traction rope and ground wire.
The swivel connector is connected to the tool cable buckle or traction plate through the pin shaft and pin sleeve at both ends and bears the tension. The internal structure adopts plane thrust ball bearing to bear the axial load at both ends, and two radial ball bearings are equipped to guide to bear the radial load imposed by the pulley groove of paying off pulley. Under the joint action of two kinds of bearings, the rotary connector can rotate freely under rated load and release torque.
Swivel Joint Connector, Rotating Swivel Joint,Swivel Joint, Swivel Connector
Taizhou Haoxin Electric Power Machine Co., Ltd. , https://www.hxstringingequipments.com