The steel grabber material handling machine is a kind of scrap loading and unloading equipment. It can realize a variety of operation functions by changing the gripper material handling and working device. Therefore, it is also called a grabber, which is widely used in steel plants, smelters, ports, docks and scrap transfer. Special engineering machinery in the industry, equipped with different grippers (such as plum grab, shell grab, round grab, billet grab, hydraulic shear, hydraulic pliers, etc.) to meet different customer conditions for scrap, ore, coal The demand for bulk fertilizer and yellow sand loading and unloading.
1.Economical and reliable
Single pump constant power, dual pump cross power control, stable engine output;
Negative flow pump control method and good economy;
The hydraulic oil radiator and engine water cooler are cartridge-mounted, compact and efficient;
Hydraulic hoses and seals are fixed with imported products and have high reliability.
2.Reasonable design
The boom and the arm are hydraulically locked, and the impact resistance is good, and both of them realize the double pump confluence, the stick regeneration, the multi-motion composite, and the work is stable;
Two speeds of walking speed are selected to achieve two speeds to meet different working conditions;
Upper arm brake for walking and swinging mechanism, hydraulic opening, good safety;
Flexible configuration according to different grades of users;
The power system, hydraulic system and working device can be freely and flexibly configured according to user requirements;
The working device adopts the structure of "straight moving arm and curved stick", and is equipped with electric suction cup and lifting driver's cab;
3.High efficiency and environmental protection
Simple operation, convenient maintenance and safe and reliable performance;
Environmental protection, energy saving, low noise and long service life;
The far-infrared remote control system can realize long-distance operation; the crawler type traveling device has small grounding pressure, stable walking and flexible steering.
Advantage:
1.The engine air filter is double-filtered, which can well cope with the problem of large dust on the scrap picking operation site. Especially in a closed working environment indoors, the dust concentration is greater. The dual filtration system increases engine efficiency and extends service life.
2.The cab can choose height adjustable type or fixed type with different height.The cabin is shockproof and soundproof type.It has wide view and equipped with air conditioning and audio, air seats, safe and comfortable.
3.Power system, hydraulic system and grabbing implements can be customerized according to different working size and work requirement.
4.Standard central lubrication make daily maintenance easy.
5.Diesel and electric hybrid drive can be driven by both internal combustion engine and electric motor drive.
Driven by electric motor, it has low maintenance cost, no pollution and low failure rate. 4. Motor operation is one third of the cost of internal combustion engine operation.
6.Original imported hydraulic system, exclusive electronic control system, the perfect integration of mechanical, electric and hydraulic integration.
7.widened and extended "X" frame, standard with 800mm aluminum plate, strong stability, to ensure the efficient operation of the whole machine.
8.It adopts high-strength wear-resistant steel, shell-type grab, plum grab, electromagnetic sucker and other accessories to flexibly switch, and can be customized according to working conditions.
9.Original imported hose, steel wire surround, to prevent oil leakage, high reliability.
10.Equipped with a hydraulic oil strong air heat sink to ensure that the hydraulic oil temperature rise of the equipment does not exceed 80 °C. Effectively extend the life of hydraulic seals.
Specification:
Â
| Item | unit | YGLZ90 | ||
| Operating weight | kg | 8300 | ||
| Overall size | mm | 7250*2180*2950 | ||
| Engine | Model | Weichai | ZGBZG1 | |
| Power | kw | 59 | ||
| Speed | rpm | 2400 | ||
| Max torque | n.m | 209 | ||
| Fuel comsumption | g/kw.h | ≤251 | ||
| Fuel tank volume | L | 140 | ||
| Hydraulic system | Main pump | Rexroth | AP3VO95 | |
| Rated pressure | Mpa | 30 | ||
| Rated flow | L/min | 190 | ||
| Main valve | Rexroth | VS18LUDV | ||
| Hydraulic oil tank volume | L | 160 | ||
| Hydraulic motor | Swing motor | Rexroth | MA45WOL | |
| Walking motor | model | A2F80 | ||
| Performance digital | Swing speed | rpm | 10 | |
| walking speed | High speed | Km/h | 20 | |
| Low speed | Km/h | 3.9 | ||
| Max torque | kn | 53 | ||
| Gradeability | ° | 25 | ||
| Cabin | 1380*930*1600 | |||
| Swing support | QBD800 | |||
| Axle | 2080 | |||
| Tyre | 825-16 | |||
| Cylinder | Imported seals | |||
| Hydraulic hose | Manuli | |||
| Gauges | Colored gauges | |||
| Item | Unit | FMWG90 |
| Upper width | mm | 2170 |
| Tail swing radius | mm | 2000 |
| Counter balance clearance | mm | 1095 |
| Min clearance | mm | 250 |
| wheel base | mm | 1670 |
| track base | mm | 2300 |
| Arm length | mm | 3600 |
| Stick length | mm | 1800 |
| Grapple volume | m3 | 1 |
| Total width | mm | 2720 |
| Â | Â | Â |
| Grapple size |  |  |
| Item | Unit | FMWG90 |
| Sell weight | kg | 336 |
| Overall size(open) | mm | 1520*710*1475 |
| Working pressure | Mpa | 30 |
| Max open size | mm | 1436 |
| Min close size | mm | 175 |
| Rotation angle | ° | 360 degree |
| Max unloading height | mm | 4730 |
| Radius at max unloading height | mm | 3320 |
| Max grapple radius | mm | 7580 |
| Max grapple radius at ground | mm | 7375 |
| Max grapple depth | mm | 4535 |
| Radius at max grapple depth | mm | 2919 |
More models
Â
Features
The machine is used to process untwisted chinlon into high stretch fiber.At the same time, it can make spandex and stretch chinlon to be air covering. Through the special intermingle nozzle to achieve chinlon/polyester air covering in one step. The machine is the most advanced, low energy consumption,but high production.
Performance
1.Three rollers named machine D1,D2,D2.2,all adopt the godet mechanism. The godet is controlled by the micro-motors. It control the fiber will and ensure the stretching.
2.The machine`s two sides (A-B) running relatively independent, both adopt energy-saving motor instead of belt,the process parameters can be set separately. Two sides could process different productions.
3.The specially energy-saving nozzle can save air and power.
4.Two-step D2 roller structure improve the node uniformity and fastness of the nylon spandex.
5.The special fiber structure is adopted to improve the efficiency of fiber processing.
6.The adjustable spandex universal support is adopted to ensure the spandex feeding well during high speed running.
7.Electric structure ensures convenient and quick threading.(Optional)
8.Machine`s deformation heater adopts biphenyl air heating.The temperature precision is exact to ±1 ℃ assure every spindle`s temperature to be same.This is beneficial for dying.
9.Excellent machine structure reliable drive system and low noise. It is easy for process adjustment, and maintained by single spindle to improve productivity.
Technical Specification
Type: V type
Spindle Number:240spindles ,24 spindles/section X 10 =240spindles
Spindle Gauge:110mm
False Twisting Type:stacked disc friction false twister
Length of Heater :2000mm
Heater Temperature Range:160℃-250℃
Method of Heating:biphenyl air heating
Maximum Speed: 1000m/min
Process speed:800m/min~900m/min
Take-up Package:Φ250xΦ250
Winding Type:groove drum type friction winding , packaged with double tapers bobbin
Spinning Range:spandex 15D~70D; chinlon 20D~300D
Installed power:163.84KW
Effective power:80KW~85KW
Machine Size:18730mmx7620mmx5630mm
Draw Texturing & Air Covering Machine
Yarn Covering Machine,Air Covering Machine,Spandex Produce Machine,Textured Yarn Drawing Machine
XINCHANG LANXIANG MACHINERY CO.,LTD , http://www.xclxjx.com