Plastic Film Dewatering Drying Machine

Plastic Film Dewatering Drying Machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed,using the squeeze dewatering principle,squeeze the water from the plastic by rotating screw.The water will flow out from the bottom,the plastic will get hot by high intensity extrusion friction,and will plasticizing mildly after the mould heating.Finally the blade will cut the granules from the mould.

Advantage of squeezer dryer plastic machine:

1. Low power consumption. Main motor power between 90kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%

2. Small land occupied

3. Low rotation speed, almost no noise.

4. Dewatering function is better, final products humidity less then 3%

5. After squeeze dry granulating machine, the material can put into granulator driectly, do not need the forced feeding machine.

6. Mechanical squeeze dewatering,compared with the original hot air drying, do not need use dewatering machine, drying system and the agglomerator machine,it can save the energy greatly.

Plastic Film Dewatering Drying Machine,dewatering plasticplastic dewater machine,dry plastic dewatering machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com