Qdl/Aldf Vertical Stainless Steel Multistage Pump

Posted on

  • Impeller Number: Multistage Pump
  • Position of Pump Shaft: Vertical Pump
  • Specification: SGS, ISO9001
  • Working Pressure: High Pressure Pump
  • Trademark: AOLI
  • Origin: China

Qdl/Aldf Vertical Stainless Steel Multistage Pump
CHINA AOLI MACHINERY GROUP
CDLF series are vertical multi-stage stainless steel pumps designed for pumping clean water and similar liquids without solids, fibers & non-explosive. Ideal for water supply and liquid delivering in Cooling systems, Industrial cleaning, fishery, water treatment, as well as liquid boosting and circulation systems etc...

QDL/ALDF Stainless Steel Multistage Pump Working Conditions:
--Temperature Range: -15~120 degree
--Ambient Temperature: Up to 40 degree
-- Max Operating Pressure: 10 Bar
--Min Suction Pressure: Min Safe Head NPSH + 0.5m

QDL/ALDF Stainless Steel Multistage Pump Typical applications
- Urban water supply and pressure boosting
- Industrial circulating system and processing systems
- Boiler water feed or condensate systems
- Environmental protection water treatment and infiltration analysis system
- Agricultural irrigation and dewatering
- Industrial building cleaning and other washing
- Others special applications
Qdl/Aldf Vertical Stainless Steel Multistage Pump

The data above is a part of our products,we can choose the perfect pump for you according to your requirements.

 

Please feel free to contact us if you have any question.

 

Contact Details:

 

David Song

 

Sales Manager

 

Tel: +86-21-39170017(direct), Fax: +86-21-39170010

 

Mob: +86-(0)13816987562
 

The HG-808 Exothermic Insulating Covering Agent is our self-developed product ,which is used for covering the open riser. It is suitable for all kinds of casting alloy. 

Characters:

 1.The heat energy generated by the heating material in the covering agent, compensate the heat lose of the riser, so the feeding effect is much better. 

 2.The spread-ability of the insulating material in the covering agent can make the top of the riser adiabatically.

 3. Speed down the pace of heat dissipation of the riser top, prolong the solidification time of the riser to have a better feeding.

 4. The shape of the shrinkage cavity is U or a dish , which can add the riser`s safe height to prevent fault and improve the production rate of the process.

Exothermic Insulating Covering Agent

Exothermic Insulating Covering Agent

Exothermic Insulating Covering Agent,Exothermic Covering Agent For Casting

Baoji Huaguang Casting Material Science and Technology Co.,Ltd , http://www.bjhgcasting.com