Reasonable Design of Rice Husk Pellet Mill for Sale

Reasonable Design of Rice Husk Pellet Mill For Sale

Product Features 
Straw pellet mill
1. The machine adopted the bevel gear transmission, compact structure, high transmission efficiency low electricity consumption;   
2. The right end of the overload protection device structure;  
3. To ensure that the small straw material fast into pellet room, specially designed with a forced feed mechanism; 
4. The auger of forced feed structure adopted special uniform materials to feed uniformity;  
5. To those fluffy, bulk density light straw adopted twisted dragon blade, screw combination structure ensure the straw conveying uniformly;
Sawdust pellet mill 
1. Frequency conversion speed-adjusting motor regulating feeding rate, feed screw with variable pitch helical structure, balance feeding and precise control;
2. Conditioner cylinder with large opening structure which is easy to check and maintenance;
3. The conditioner simplified with mist nozzle, it can add proper water as required to make the raw materials achieve the best effect;
4. It can install overboard discharging handle or pneumatic discharging on the chute, which is easy to operate to realize automatic control;
5. Fitting with ring lifting device which is easy to disassembly ring and reduce labor intensity;
6. Large machine adopts magnetic filtering, cooling and fuel cut alarm in a whole of the machine oil cooling lubrication system, force to lubricate main bearing, hollow shaft rear bearing and gear shaft rear bearing;
7.  According to the ring die speed of material, improve pellet effect.

Performance Parameter
High Capacity Complete Wood Pellet Mill Production Line
Provide Layout ,Flow design, Manufacture, Installation, Commissioning,Electrical Control and Operation Training.
1 Construction of all sizes biomass production line (1-20t / h) 
2 Tailored to your production plant and a full-service
3 Can be formulated according to customer requirements, installation

Biomass Production Line 
1  1-20t/h Wood pellet production line            2  1-20t/h Palm pellet product production line  
3  1-20t/h Rice husk pellet production line      4  1-20t/h Straw pellet production line

Our Services
1  Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer.
2  Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there untill get your agreement.
3  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons.
5  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.

Packaging & Shipping
FAQ
1. Will you help with installatino and stuff training ?
Of course, we can send our skilled engineers to provide you entire service from the installation, commissioning and training.
2. How do you control the quality? 
We insist "Expertise create infinite" and always pay great attention to quality control from the very beginning to the end. You can also be reassured by our one-year warranty and CE&BV$SGS Certificates.
3. Can you provide turn- key project?
Yes, we have enough experience in installing turn-key projects overseas. 
4. Where is your factory located? How can I visit there? 
Our factory is located in Liyang City, Jiangsu Province, China, near Shanghai. You can fly to Shanghai airport or Nanjing Airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Packaging:
Packing by Wooden case Usually,We also do Other Packaging as Per Customer's Requirement.

Shipping:
1  European Countries: 22-28 days
2  United States: East --13-16 days, West--21-28 days
3  Brazil: 30-40 days 
4  Russia: 36 days
5  Asia Countries: 3-5days
  Reasonable Design of Rice Husk Pellet Mill For Sale

Product Features 
Straw pellet mill
1. The machine adopted the bevel gear transmission, compact structure, high transmission efficiency low electricity consumption;   
2. The right end of the overload protection device structure;  
3. To ensure that the small straw material fast into pellet room, specially designed with a forced feed mechanism; 
4. The auger of forced feed structure adopted special uniform materials to feed uniformity;  
5. To those fluffy, bulk density light straw adopted twisted dragon blade, screw combination structure ensure the straw conveying uniformly;
Sawdust pellet mill 
1. Frequency conversion speed-adjusting motor regulating feeding rate, feed screw with variable pitch helical structure, balance feeding and precise control;
2. Conditioner cylinder with large opening structure which is easy to check and maintenance;
3. The conditioner simplified with mist nozzle, it can add proper water as required to make the raw materials achieve the best effect;
4. It can install overboard discharging handle or pneumatic discharging on the chute, which is easy to operate to realize automatic control;
5. Fitting with ring lifting device which is easy to disassembly ring and reduce labor intensity;
6. Large machine adopts magnetic filtering, cooling and fuel cut alarm in a whole of the machine oil cooling lubrication system, force to lubricate main bearing, hollow shaft rear bearing and gear shaft rear bearing;
7.  According to the ring die speed of material, improve pellet effect.

Performance Parameter
High Capacity Complete Wood Pellet Mill Production Line
Provide Layout ,Flow design, Manufacture, Installation, Commissioning,Electrical Control and Operation Training.
1 Construction of all sizes biomass production line (1-20t / h) 
2 Tailored to your production plant and a full-service
3 Can be formulated according to customer requirements, installation

Biomass Production Line 
1  1-20t/h Wood pellet production line            2  1-20t/h Palm pellet product production line  
3  1-20t/h Rice husk pellet production line      4  1-20t/h Straw pellet production line

Our Services
1  Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer.
2  Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there untill get your agreement.
3  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons.
5  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.

Packaging & Shipping
FAQ
1. Will you help with installatino and stuff training ?
Of course, we can send our skilled engineers to provide you entire service from the installation, commissioning and training.
2. How do you control the quality? 
We insist "Expertise create infinite" and always pay great attention to quality control from the very beginning to the end. You can also be reassured by our one-year warranty and CE&BV$SGS Certificates.
3. Can you provide turn- key project?
Yes, we have enough experience in installing turn-key projects overseas. 
4. Where is your factory located? How can I visit there? 
Our factory is located in Liyang City, Jiangsu Province, China, near Shanghai. You can fly to Shanghai airport or Nanjing Airport directly. All our clients, from home or abroad, are warmly welcome to visit us!

Packaging:
Packing by Wooden case Usually,We also do Other Packaging as Per Customer's Requirement.

Shipping:
1  European Countries: 22-28 days
2  United States: East --13-16 days, West--21-28 days
3  Brazil: 30-40 days 
4  Russia: 36 days
5  Asia Countries: 3-5days
 

Tungsten Particle

Basic use: About 50% of the tungsten ore mined in the world is used for the smelting of high-quality steel, about 35% is used for the production of hard steel, about 10% is used for making tungsten wire, and about 5% is used for other purposes. Tungsten can be used to manufacture firearms, rocket propeller nozzles, armor-piercing bullets, metal-cutting blades, drills, superhard dies, wire drawing dies, etc. Tungsten is widely used in mining, metallurgy, machinery, construction, transportation, electronics, chemical industry, Light industry, textile, military industry, aerospace, science and technology, various industrial fields.
Tungsten is widely used in modern technology in pure metal state and alloy system state. The most important alloy system state is alloy steel, tungsten carbide-based cemented carbide, wear-resistant alloy and strong heat alloy. Tungsten is mainly used in the following industrial fields:
Steel industry: Tungsten is mostly used in the production of special steel. The widely used high speed steel contains 9%-24% tungsten, 3.8%-4.6% chromium, 1%-5% vanadium, 4%-7% cobalt, 0.7%-1.5% carbon. The characteristic of high-speed steel is that it can be automatically quenched at a high tempering temperature (700-800℃) in the air, so it maintains high hardness and wear resistance until 600-650℃. Tungsten steel in alloy tool steel contains 0.8%-1.2% tungsten; chromium-tungsten silicon steel contains 2%-2.7% tungsten; chromium-tungsten steel contains 2%-9% tungsten; chromium-tungsten-manganese steel contains 0.5%- 1.6% tungsten. Tungsten-containing steel is used to manufacture various tools: such as drills, milling cutters, wire drawing dies, female and male dies, air tools and other parts. Tungsten magnet steel is a permanent magnet steel containing 5.2%-6.2% tungsten, 0.68%-0.78% carbon, and 0.3%-0.5% chromium. Tungsten-cobalt magnets contain 11.5%-14.5% tungsten, 5.5%-6.5% molybdenum, and 11.5%-12.5% cobalt hard magnetic materials. They have high magnetization and coercivity.

Tungsten Particle,Low Carbon Tungsten Particles,Iron Alloy Tungsten Particles,High-Purity Tungsten Particles

Jiangsu Lucky Metal Materials Co., Ltd. , https://www.luckymetalmoly.com