1. Hazard source: The surrounding environment has not been checked.
Description of risk and its consequences: loose coal, coal wall umbrella canopies, live dangerous rock partings injured.
Pre-control measures: The top support is safe and reliable within 5m of the working environment. The work site is strictly implemented with the help of the top, and the active and dangerous rock is treated in time.
2. Hazard source: The signal is not good or malfunctions.
Description of risks and consequences: It is easy to cause timely shutdown if there is an accident.
Pre-control measures: 1 Before starting the machine, you must carefully check the integrity of the voice signal, and then confirm that it is ready to boot; 2 When you turn on the machine, first click 2-3 times, after confirming the correct, you can start normally.
3, the source of danger: clean up the slippery head and the tailing coal.
Description of risks and consequences: It is easy to wring the operator.
Pre-control measures: Install the shield on the exposed transmission and rotating parts, and fix it firmly. It is strictly forbidden to clean coal when starting up, and the floating coal can be cleaned after stopping.
4, the source of danger: contact with electrical equipment or sitting on electrical equipment to open the slippery.
Description of risks and consequences: It is easy to cause electric shock and injury.
Pre-control measures: 1 Do not touch the electrical equipment without authorization; 2 Do not sit on the electrical equipment to open the slide; 3 must implement the remote operation button.
5, the source of danger: slippery head, slippery tail is not fixed.
Description of risk and its consequences: It is easy to cause slippage and slippage after the start-up.
Pre-control measures: the bottom end of the slippery head and the tail end must be anchored with a 40-slip big chain double chain to securely.
6, the source of danger: slippery scraper or large chain break.
Description of risks and consequences: It is easy to cause splashes and injuries.
Pre-control measures: adhere to the patrol inspection system, find that there is damage, and stop the replacement in time.
7. Hazard source: transport large pieces of meteorites or materials on the slipper.
Description of risk and its consequences: susceptible to bruises.
Pre-control measures: It is strictly forbidden to transport large pieces of vermiculite or materials on the slippery, and it is found that large pieces of vermiculite and materials are shut down in time.
8, the source of danger: across the slipper.
Description of risks and consequences: It is easy to cause crushing or straining.
Pre-control measures: pedestrian crossings must be installed across the slippery location.
Machining Stainless steel is the use of CNC machining out, including drilling, boring, cutting, turning, screw, etc.. Machining stainless steel commonly used materials: sus303304316.stainless steel has a very high hardness after machining, easy deformation, so in the process of rough machining to eliminate stress, and then finished. Surface treatment is generally passivation, we have specialized laboratories to test products, and ensure that each size to meet the requirements of the drawings, including the machining stainless steel application in various industries: automobile, ship, crane, medical equipment, industrial automation equipment.
Of course,we also accept the custom machining,welcome to contact us.
Machining Stainless Steel,High Precision Machining Stainless Steel,Cnc Machining Stainless Steel,Stainless Steel Machining,Steel Machining
Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com