Also called as Cotter pins, split cotter pins. Made of spring steels, brass or stainless steel.
Generally used with clevis pins, slotted nut, bore, shaft, wheel and other device for locking purpose.
Metric size and inch size available, regular sizes in stock sales
1/16"X1"
3/32"X1"
3/32X1-1/2"
1/8"X1-1/4"
1/8"X2"
5/32"X2-2-1/2"
Stanard DIN94, ISO1234
ASME/ANSI B 18.8.1 1983
QS500
BS 1574-1994
UNI 1336
NF E 25-774-1997
GB/T 91-2000
ANSI/ASME/GB/JIS or customized
Material could be SAE1070, 65Mn Spring Steel, Stainless Steel
AISI 304, SUS316, SS201
All Cotter pins, split pins, R type lock pin, used to lock other components of sharf,
Bore, sollted nut, clevis pins, etc
Surface: Galvanized, color-zinc plated, nickel, chrome, black oxide
Split pins (Cotter pins) are commonly used for securing wheels and cowls etc.
Transhow Fasteners, produce and export more pins, split pins, r pins, cotter pins, clevis pins, spring pins. ANSI B18.8.1 DIN94 ISO1234 Split Cotter Pins
Also called as Cotter pins, split cotter pins. Made of spring steels, brass or stainless steel.
Generally used with clevis pins, slotted nut, bore, shaft, wheel and other device for locking purpose.
Metric size and inch size available, regular sizes in stock sales
1/16"X1"
3/32"X1"
3/32X1-1/2"
1/8"X1-1/4"
1/8"X2"
5/32"X2-2-1/2"
Stanard DIN94, ISO1234
ASME/ANSI B 18.8.1 1983
QS500
BS 1574-1994
UNI 1336
NF E 25-774-1997
GB/T 91-2000
ANSI/ASME/GB/JIS or customized
Material could be SAE1070, 65Mn Spring Steel, Stainless Steel
AISI 304, SUS316, SS201
All Cotter pins, split pins, R type lock pin, used to lock other components of sharf,
Bore, sollted nut, clevis pins, etc
Surface: Galvanized, color-zinc plated, nickel, chrome, black oxide
Split pins (Cotter pins) are commonly used for securing wheels and cowls etc.
Transhow Fasteners, produce and export more pins, split pins, r pins, cotter pins, clevis pins, spring pins.
Nox Sensor 12V For CHRYSLER Car
Nox Sensor 12V for Chrysler car, auto parts Chrysler car sensor 12V Nox sensor is suitable for Chrysler car exhaust treatment.
Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.
The effects of Nox sensor damage are as follows:
1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.
2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.
3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,.
Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.
Nox Sensor 12V For CHRYSLER Car,Dodge Auto Parts 12V Nox Sensor,Chrysler car sensor 12V Nox sensor,For Chrysler Dodge 12V Nox sensor
Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com