Many newcomers who have just got a driver's license, driver's license according to one success, really found the parking on the road is a very difficult technical job, not to mention that some people are driving a suction truck . In addition, with the rapid growth of automobiles, parking spaces are becoming more and more nervous, and many old drivers are worried about parking, let alone newcomers. Today, we take a look at the lateral orientation of the suction truck.
Side orientation parking suction truckStopping the suction vehicle in the lateral direction firstly determines whether or not the neutral is sufficient. This requires the driver to fully understand the size of the suction vehicle. In addition, the width of the suction body is also crucial. At the time of parking, the body width we are referring to refers to the distance between the mirrors on both sides. In the scraping accidents that occur during parking, the scraping caused by the driver's incomplete understanding of the width of the vehicle occupies a large part. Finding the car is still the most important thing.
As with reversing the warehousing, the "straight-kicking" approach is also the most difficult when stopping the suction of the fecal vehicle in the lateral direction. Especially if the gap is not large enough, we will find that regardless of how you adjust the angle, the vehicle body will basically be exposed. Part of the parking space outside.
When stopping the suction of the fecal vehicle in the lateral direction, we must pay attention to the vehicle not getting too close to the vehicle, and then when the right mirror of the vehicle coincides with the B-pillar of the vehicle, the vehicle can start to stop.
For beginners, if the reversing is not skilled, the wheel speed is not fast enough. When parking in the starting side orientation, kill the enemy in the right direction and rewind slowly backwards.
When half of the car body enters the parking space and the rear vehicle headlights can be seen from the left side mirror, quickly turn the steering wheel to the left and continue to slowly reverse the car. This reminds you that the steering wheel is in a state of death for a long time and it hurts the power. We can Under the premise of not affecting the direction of movement of the vehicle, a little steering wheel is returned.
When the sideways parking is often due to lack of sense of distance and unfamiliar control of the vehicle, it causes the rear wheel to collide with the road shoulder (or scrape the wheel hub). At this time, we can adjust the slight mirror downwards for better Observe the separation between the wheels and shoulders. In the event of scratching the hub, do not hit the wheel in place. You should keep the vehicle in the original direction out of the parking space and stop again.
As far as possible, the suction truck vehicle should be straightened. The vehicle body should be as close as possible to the roadside. Afterwards, the distance between the front and rear of the vehicle should be controlled to prevent the vehicle from being blocked in the parking space. The driver can observe it in the car and can just see the front vehicle license plate. For safety car distance. At the same time, we should cooperate with reversing radar to master the rear safe distance.
HTD is a professional machinery manufacturer with more than 15 years. Since its establishment, we have been adhering to the core of user needs, and have been providing stable quality equipment, raw materials, and thoughtful after-sales service to customers in more than 30 countries and regions around the world, winning the trust of customers and praise from many companies.
Our main products are:fully automatic medical Mask machine,fully automatic 2D folding mask machine like KN95 mask making machine and N95 mask making machine,3D mask making machine like the fully automatic Cup Mask Machine,disposable 3ply flat face mak machine,KF94 fish type mask making machine and others non-woven fabrics products and raw materials,spare parts and so on.
High Speed Flat Ear-Loop Disposable Flat Face Mask Making Machine is a full-automatic production line consists of a mask body machine, ear band welding machine, and a conveyor. It has mask folding, flanging, nose strip feeding. The functions of body welding, cutting, ear band welding, edging welding, edging cutting and mask output, realize the automatic production of 3 to 4 layers of flat masks with inner ear edging or outer edging (mask size can be customized according to customer requirements,logo customazation are available).3ply mask machine is fully automated, without manual operation, so as to improve efficiency .This production line is simple, practical, stable and reliable, has a wide range of versatility, compatibility and excellent cost performance. It is a best-selling model with extremely high practicability.
We provide customers with labor-saving, efficient and stable automated production equipment,We offer free consulting, can strongly supply the mask materials and machine efficient after-sales service in One-stop service.All of our products have CE and test reports.
We can be your reliable business partner!
Flat Mask Making Machine,3 Ply Face Mask Making Machine,Disposable Flat Face Mask Making Machine,3ply Surgical Medical Face Mask Making Machine
GUANGZHOU HTD INTERNATIONAL , https://www.htdmask.com