Sweden Material Fin Die Long Lifespan

50mm oblique hole fin die

1. Feed progression:50mm
2. Parts:19 parts per stroke as the drawing show 
3. Material: Temper H18
4. Fin stock thickness range: 0.12~0.18mm
5. Feed: internal hitch finger pull type
6. Cut off: guillotine type cut off with plain grind insert blades.
7. Heating hole stage:only one type as the drawing show.
8. Standard production rate: 100-180 strokes per minute.
9. Every guide post has lubrication
10. This die consists of forming stage, long hole pierce station, reflare,heating hole stage,    edgetrim , slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)

60mm oblique hole fin die
1.   Feed progression:60mm.
2.   Parts:19 parts per stroke as the drawing show
3.   Material: Temper H18
4.   Fin stock thickness range: 0.12~0.18mm
5.   Feed: internal hitch finger pull type
6.   Cut off: guillotine type cut off with plain grind insert blades.
7.   Heating hole stage:two type as the drawing show.
8.   Standard production rate: 100-180 strokes per minute
9.   Every guide post has lubrication
10.  This die consists of forming stage, long hole pierce station, reflare,heating hole stage, Edgetrim, slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)
 
FIN DIE Material and standard component
We made our FIN DIE use the best quality material from JAPAN or SWEDEN. The following form shows some of our material used in the FIN DIE.  
We choose the best standard components in the world to use in our FIN Line and machines(such as MISUMI and SMC). We will give all the list (size,type,grade)of the standard components to you when our die would be delivered along with the assembly drawing and spare parts drawing for the fin die.
 
   WARRANTY:
We warrants to the purchaser is free of defective materials and workmanship for a period of 12 month it does not cover damages or failures due to improper use of our machines or beyond its rated capacity.
  50mm oblique hole fin die

1. Feed progression:50mm
2. Parts:19 parts per stroke as the drawing show 
3. Material: Temper H18
4. Fin stock thickness range: 0.12~0.18mm
5. Feed: internal hitch finger pull type
6. Cut off: guillotine type cut off with plain grind insert blades.
7. Heating hole stage:only one type as the drawing show.
8. Standard production rate: 100-180 strokes per minute.
9. Every guide post has lubrication
10. This die consists of forming stage, long hole pierce station, reflare,heating hole stage,    edgetrim , slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)

60mm oblique hole fin die
1.   Feed progression:60mm.
2.   Parts:19 parts per stroke as the drawing show
3.   Material: Temper H18
4.   Fin stock thickness range: 0.12~0.18mm
5.   Feed: internal hitch finger pull type
6.   Cut off: guillotine type cut off with plain grind insert blades.
7.   Heating hole stage:two type as the drawing show.
8.   Standard production rate: 100-180 strokes per minute
9.   Every guide post has lubrication
10.  This die consists of forming stage, long hole pierce station, reflare,heating hole stage, Edgetrim, slit, feeding and cut off station. We will use four ball cages, guide posts and bushings in the main die
11. Lifespan: 300 million times of punching (300,000,000)
 
FIN DIE Material and standard component
We made our FIN DIE use the best quality material from JAPAN or SWEDEN. The following form shows some of our material used in the FIN DIE.  
We choose the best standard components in the world to use in our FIN Line and machines(such as MISUMI and SMC). We will give all the list (size,type,grade)of the standard components to you when our die would be delivered along with the assembly drawing and spare parts drawing for the fin die.
 
   WARRANTY:
We warrants to the purchaser is free of defective materials and workmanship for a period of 12 month it does not cover damages or failures due to improper use of our machines or beyond its rated capacity.
 

Trigger Sprayer

Trigger sprayer including Regular Trigger Sprayer,Mini Trigger Sprayer,All Plastic Trigger Sprayer, Foam Trigger Sprayer ,Strong Trigger Sprayer

Normally used for window cleaning,car wash bottle sprayer,hair care sprayer,house cleaning, laundry care, & pet training.etc.

with adjustable nozzle: Adjusts from fine stream to spray to OFF by turning nozzle

And some trigger sprayer with foam nozzle

Trigger Sprayer,Trigger Spray Bottle,Alcohol Trigger Spray,Trigger Spray Pump

NINGBO CRETE PLASTIC CO.,LTD , https://www.crete-sprayer.com