What factors should be considered when installing lifting columns?

What factors should be taken into consideration when selecting a lifting column? Nico Galim lifting column manufacturers summarize the following points in the hope of helping you.

1, the width of the channel: the width of the channel required to determine the need to use the number of equipment, under normal circumstances adhere to the cylinder spacing of 1 m -1.3 m. Not more than 1.5 m. Different applications can control the distance width according to actual needs.

2. Traffic flow: This figure is one of the most important parameters for selecting commodities, but users usually neglect this parameter. Leading the year/month total traffic volume of the device, even traffic volume.

3, the use of frequency: should understand the short-term traffic flow during the peak period of the use of the occasion.

4, lifting speed: usually more concerned about this parameter.

5, the thickness of the use of different occasions requirements: According to the use of custom lifting column thickness (6mm/8mm/10mm/12mm can be customized)

6. Group control: Is it necessary to divide the lanes in and out, perhaps grouping them up and down in the lanes, and decide on the configuration and selection of all control systems.

7, rainfall and drainage: Because the demand for lifting columns is buried deep below the ground, it will inevitably soak in the water. If you use occasions such as heavy rainfall, high probability of heavy rain, poor drainage system, low topography or shallow groundwater, be careful when selecting equipment, because the equipment you pick may stay in water for a long time. In addition to doing a good job of draining water, we must also consider elements such as the structure of the equipment. It is a very dangerous job to make water-proof devices unreliable or to use high-voltage equipment directly in water.