Energy is related to industry and social development. The adequacy of energy supply is closely related to economic operation. With the advancement of science and technology, a variety of new energy sources are gradually being applied to industrial production, replacing some non-renewable energy sources. What is biomass energy? ? What is the biomass fuel burned in the boiler? Let's take a look at the next big boiler manufacturer.
What is biomass energy?
Biomass energy refers to the energy that converts solar energy into chemical energy stored in biomass. Thermochemical conversion of solid biomass into combustible gas, tar, or biochemical conversion technology converts biomass into microbial fermentation. Biogas, alcohol, etc.
At present, most of the most common biomass energy is biomass pellets or blocks used in boilers, high calorific value, pollutant emissions, and good replacement of non-renewable energy fuels, which has alleviated the increase in market fuel prices. The problem of production costs of enterprises.
Boiler burning biomass
Common types of biomass fuels that can be used for boiler combustion include straw, rice husks, coconut shells, palm shells, sawdust, and wood waste. After simple processing and processing, they can be directly filled into boilers for combustion. As shown below:
Boiler burning biomass characteristics
1. It is easy to ignite, the biomass particles are easy to ignite, after burning, no coking, the boiler has a long service life, and the chaff ash of the hand-fired boiler is of great use in agriculture.
2. Low cost, low operating cost of biomass boiler, manual mechanization operation, less failure rate, which reduces daily maintenance costs, and the source of biomass raw materials is large, and the amount of renewable energy is large, so that after molding The biomass pellets are not sold at a high price, which increases profits for the company.
3. Low pollution, biomass fuel combustion and gas-fired boilers have lower nitrogen oxide emissions, which can greatly reduce environmental pollution.
Manual Saw Blade Pipe Cutting Machine
1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.
Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com