Car Moter Flush / Car Care Product Made in China (AK-CC5006)

Moter Flush


DETIALED INFORMATION

Product Description
Autokem Engine Flush is speicially formulated to rapidly dissolve harmful engine deposits and maintain efficient oil circulation throughout the entire engine, it can reach every corner of the engine and clean the carbon and gum accumlated inside of the engine, helping to protect vital engine wear surfaces throughout the flush. 


Properties: 
1. Gentle and rapid cleaning. 
2. Neutral to seals and other materials installed in the engine. 
3. Compatible with catalytic converters. 
4. Highly economical. 
5. No additional environmental pollution. 


Benefits: 
1. Dissolves sludge and lacquer and isolates solid particles and liquid contaminants. 
2. Removes deposits, residues from engine, improves the combusition process and restores full engine performance. 
3. Prevents corrosion of unprotected metal surfaecs. 
4. Recovers oil lubricating properties. 
5. Fully campatible with all commercially available engine oils. 


Instructions: 
Use Autokem Engine Flush just before changing oil, before replacing the engine oil, start engine to getting normal temperature, then turn off. Then add the contents and Let engine run on idle speed for 10 minutes. And then change the engine oil with high quality. To guarantee a good function of the engine oil, it's necessary to change to change the oil filter in the meanwhile. 


Cautions: 
1. Combustible liquid. 
2. Far away from heat flame. 
3. Harmful if swallowed. 
4. Keep out of reach of children. 
*Skin Contact
Flush skin with plenty of water. If irritation persists, seek medical attention. 
*Eyes Contact
Immediately flush eyes with plenty of water for 15 minutes and seek medical attention. 






Our Service



FAQ 

Moter Flush


DETIALED INFORMATION

Product Description
Autokem Engine Flush is speicially formulated to rapidly dissolve harmful engine deposits and maintain efficient oil circulation throughout the entire engine, it can reach every corner of the engine and clean the carbon and gum accumlated inside of the engine, helping to protect vital engine wear surfaces throughout the flush. 


Properties: 
1. Gentle and rapid cleaning. 
2. Neutral to seals and other materials installed in the engine. 
3. Compatible with catalytic converters. 
4. Highly economical. 
5. No additional environmental pollution. 


Benefits: 
1. Dissolves sludge and lacquer and isolates solid particles and liquid contaminants. 
2. Removes deposits, residues from engine, improves the combusition process and restores full engine performance. 
3. Prevents corrosion of unprotected metal surfaecs. 
4. Recovers oil lubricating properties. 
5. Fully campatible with all commercially available engine oils. 


Instructions: 
Use Autokem Engine Flush just before changing oil, before replacing the engine oil, start engine to getting normal temperature, then turn off. Then add the contents and Let engine run on idle speed for 10 minutes. And then change the engine oil with high quality. To guarantee a good function of the engine oil, it's necessary to change to change the oil filter in the meanwhile. 


Cautions: 
1. Combustible liquid. 
2. Far away from heat flame. 
3. Harmful if swallowed. 
4. Keep out of reach of children. 
*Skin Contact
Flush skin with plenty of water. If irritation persists, seek medical attention. 
*Eyes Contact
Immediately flush eyes with plenty of water for 15 minutes and seek medical attention. 






Our Service



FAQ 

Oxide Ceramics Powder

Oxide powder for thermal spray refers to a type of powder material that is used in thermal spray processes. Thermal spray is a coating technique where a material in powder form is heated and propelled onto a substrate, forming a coating.

Oxide powders are commonly used in thermal spray applications due to their high melting points, excellent wear resistance, and thermal insulation properties. They can be used to create protective coatings on various surfaces, such as metals, ceramics, and plastics.

Some common types of oxide powders used in thermal spray include:

1. Aluminum oxide (Al2O3): This oxide powder is widely used for its high hardness, wear resistance, and thermal insulation properties. It is commonly used for coating applications in industries such as aerospace, automotive, and electronics.

2. Zirconium oxide (ZrO2): Zirconium oxide powder is known for its high melting point and excellent thermal barrier properties. It is often used in thermal spray coatings for gas turbine engine components, where thermal insulation is critical.

3. Chromium oxide (Cr2O3): Chromium oxide powder is used for its high hardness, corrosion resistance, and wear resistance. It is commonly used in applications where high temperature and abrasive wear resistance are required.

4. Titanium oxide (TiO2): Titanium oxide powder is known for its high refractive index and excellent UV resistance. It is often used in thermal spray coatings for optical and decorative applications.

These oxide powders can be applied using various thermal spray techniques, such as flame spraying, plasma spraying, or high-velocity oxy-fuel (HVOF) spraying. The choice of oxide powder and thermal spray technique depends on the specific application requirements and desired coating properties.

Oxide Ceramics Powder,Pure Aluminum Oxide Powder,Chromium Oxide Ceramics Powder,Yttria Stabilized Zirconia Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com