Haisi PP/PE Color Masterbatch Compouding Twin Screw Extruder

Description:
    The machines are designed by suing the "toy bricks" principle, the screw configuration, barrel setup,
L/D or mode of feeding and venting, screen changing, way of granulating, and the control mode can be
optimally adjusted according to different materials properties and requirements in consideration of the
versatility in each general applications.
 
Parameter Table: 
Typical work:
TSE\TSH co-rotating twin screw extruder is able to process materials as follow:
Filling and modification
General and fibre color masterbatch 
Blending modification (rubber & plastic blending, plastic alloy)
Functional masterbatch
Glass fibre or carbon reinforcement
Various cable material
Handling after dewatering
Special material
Powder coating

Charateristics:
1.The gearbox
· New-style project of parallel three-axises driving makes the convey axis, convey chain, decelerate
and the torque assignment get together, which keep it compact, and the key bearings are imported.
· The select material of drive components is dainty, including super intension alloy cementiteing steel,
cementiting and quenching, gear grinding technics, strengthening of tooth face. So they can ensure high
torque, high precision and low noise.
· Soakage and coerce lubrication integrate smoothly. When the hydraulic circuit is over pressed, it alarms.
2.The feeding system
· Metering feeders are equipped with single screw, twin screw, hollow screw, forced-feeding, side feeding,
liquid-adding system,etc.

3.Screw 
· The screw elements and then kneading blocks are designed accurately, by precise processed, agile
combination, with interchangeability, which can fulfill efficient self-cleaning, transmission, compounding,
pressure-forming.
· The screw material is made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heat-treament.
4.The barrel 
· Eurostyle rectangle barrel, reflux refrigeration is optimized and disposed, which makes temperature
difference in C areas smaller.
· According to the material and special techinics demands, the material of cylinder can use high quality
nitrided steel, corrosion proof or antifriction with corresponding process.
5.The heater
· Innovated design of heater tightened style insures high efficiency of heat transfer and high longervity
of heater.
6.Pelletizing
· Variou modes of pelletizing, such as water-cooling strand, air-cooling, water-ring, under water pelleting, etc.
 
Exhibition in Chinaplas:


FAQ
1. Q:Are you factory or trading company? 
    A: We are manufacturer.
2. Q: What makes you different from other suppliers?
    A: 1) firstly,our factory is very professional in twin screw extruder for many years, and our machine's
quality is best in our field and our price is also competitive from other suppliers.
         2) second,our service is very excellent.and our engerneers is avaliable to service the machine overseas
and if you have any questions you can contact us at any time,we will reply you in 24hours.
3. Q:What is the payment?
    A: 1) T/T payment; 30% T/T in advance ,balance before shippment. 2) L/C or contact us for other ways.

  Description:
    The machines are designed by suing the "toy bricks" principle, the screw configuration, barrel setup,
L/D or mode of feeding and venting, screen changing, way of granulating, and the control mode can be
optimally adjusted according to different materials properties and requirements in consideration of the
versatility in each general applications.
 
Parameter Table: 
Typical work:
TSE\TSH co-rotating twin screw extruder is able to process materials as follow:
Filling and modification
General and fibre color masterbatch 
Blending modification (rubber & plastic blending, plastic alloy)
Functional masterbatch
Glass fibre or carbon reinforcement
Various cable material
Handling after dewatering
Special material
Powder coating

Charateristics:
1.The gearbox
· New-style project of parallel three-axises driving makes the convey axis, convey chain, decelerate
and the torque assignment get together, which keep it compact, and the key bearings are imported.
· The select material of drive components is dainty, including super intension alloy cementiteing steel,
cementiting and quenching, gear grinding technics, strengthening of tooth face. So they can ensure high
torque, high precision and low noise.
· Soakage and coerce lubrication integrate smoothly. When the hydraulic circuit is over pressed, it alarms.
2.The feeding system
· Metering feeders are equipped with single screw, twin screw, hollow screw, forced-feeding, side feeding,
liquid-adding system,etc.

3.Screw 
· The screw elements and then kneading blocks are designed accurately, by precise processed, agile
combination, with interchangeability, which can fulfill efficient self-cleaning, transmission, compounding,
pressure-forming.
· The screw material is made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heat-treament.
4.The barrel 
· Eurostyle rectangle barrel, reflux refrigeration is optimized and disposed, which makes temperature
difference in C areas smaller.
· According to the material and special techinics demands, the material of cylinder can use high quality
nitrided steel, corrosion proof or antifriction with corresponding process.
5.The heater
· Innovated design of heater tightened style insures high efficiency of heat transfer and high longervity
of heater.
6.Pelletizing
· Variou modes of pelletizing, such as water-cooling strand, air-cooling, water-ring, under water pelleting, etc.
 
Exhibition in Chinaplas:


FAQ
1. Q:Are you factory or trading company? 
    A: We are manufacturer.
2. Q: What makes you different from other suppliers?
    A: 1) firstly,our factory is very professional in twin screw extruder for many years, and our machine's
quality is best in our field and our price is also competitive from other suppliers.
         2) second,our service is very excellent.and our engerneers is avaliable to service the machine overseas
and if you have any questions you can contact us at any time,we will reply you in 24hours.
3. Q:What is the payment?
    A: 1) T/T payment; 30% T/T in advance ,balance before shippment. 2) L/C or contact us for other ways.

 

Hi-Carbon Steel Cut Wire Shot

Hi-Carbon Steel Cut Wire Shot, also named Reinforced Steel Shot, has a great effect on die casting parts which has a high hardness because Longlived Hi-Carbon Steel Cut Wire Shot also have high hardness while other Metal Abrasive can not meet.

Longlived Hi-Carbon Steel Cut Wire Shot is made from high quality hi-carbon steel wire by drawing, cutting and rounding. Its chemical composition is : Si:0.10-0.30%, Mn:0.40-1.20%, C:0.45-0.85%, S≦0.04%, P≦ 0.04%. Longlived Hi-Carbon Steel Cut Wire Shot is producted strictly in accordance with German standard VDFI8001/2009 and American standard SAEJ441,AMS2431. There are four types of hardness of Longlived Hi-Carbon Steel Cut Wire Shot and they are HRC 45-50, HRC 50-55, HRC 55-60 and HRC 58-63. As the development of advance technology of Longlived Metal, we have five shapes and they are as cut, G1, G2, G3 and even G4 condition, which could meet most requirement of clients. In addition, the size of Longlived Metal is from 0.25mm-2.5mm and size also could be customized if need. Longlived Hi-Carbon Steel Cut Wire Shot has a great fatigue life and it could be recycled from 3,500 times to 9,000 times. It could not only save cost but also make shot blasting faster and cleaner.

Hi-Carbon Steel Cut Wire Shot,High-Carbon Steel Cut Wire Shot Peening,High-Carbon Steel Cut Wire Shot Blasting,High-Carbon Steel Cut Wire Shot Distributor

Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com