- Model NO.: BODA-209
- Max.Capacity: as You Requested
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Verticaljoint Surface Pump
- Impeller: Open
- Material: High-Chromium Alloy A05 A07 Ni-Hard etc.
- The Length of The Immersed in Liquid: 0.9m-4m
- Structure: Single-Stage Pump
- Standard or Nonstandard: Standard
- Application: Sewage / Sump / Mining Dewatering
- Trademark: boda
- Specification: As you requested
- HS Code: 8413709990
- Max.Head: as You Requested
- Driving Type: as You Requested
- Working Pressure: High Pressure Pump
- Position of Pump Shaft: Vertical Pump
- Mounting Height: Suction Centrifugal
- Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
- Discharge Diameter: 40-300mm
- Theory: Centrifugal Pump
- Power: Electric
- Fuel: According to User Choice
- OEM: Yes
- Transport Package: Wooden Case or as Required
- Origin: Shijiazhuang, Hebei
Flow range: 0-1800 L/H
Pressure range: 0-0.6 MPA
Motor power: 750W, 1.1KW, 1.5KW, 220V / 380V / 420V / 110V, 50/60Hz,
Drive system: two-phase, three-phase standard motor or explosion-proof motor
Protection level: IP55
Flow control: manual control, automatic control (receive 4-20mA signal)
GB type mechanical diaphragm metering pump
product description
Flow range: 0-1800 L/H
Pressure range: 0-0.6 MPA
Motor power: 750W, 1.1KW, 1.5KW, 220V / 380V / 420V / 110V, 50/60Hz,
Drive system: two-phase, three-phase standard motor or explosion-proof motor
Protection level: IP55
Flow control: manual control, automatic control (receive 4-20mA signal)
GB type mechanical diaphragm metering pump
material
Pump head: SUS304, SUS316, PVC, PTFE
Diaphragm: PTFE
Check valve: SUS304, SUS316, PVC, PTFE
Ball: ZrO2, SUS304, SUS316, ceramic
Working conditions
Ambient temperature: -30 ° C --- 80 ° C
Characteristics
1. Cast aluminum housing, high heat dissipation performance, light overall weight, suitable for all kinds of acid and alkali liquid, non-toxic and tasteless.
2, the use of cam mechanism. There is no leakage at all and it can be placed on the tank or pipeline.
3. The contact medium pump head is made of PVC, optional PTFE, and stainless steel.
4, cost-effective, generally applicable to the water treatment industry with low pressure requirements.
5. The flow can also be adjusted arbitrarily or quantitatively when the pump is running or stopped.
6. The diaphragm is pressed by a multi-layer composite structure, the first layer of super-tough Teflon acid-resistant film, the second layer of EPDM elastic rubber, the third layer of thickness 3.mm SUS304 supporting iron core, and the fourth layer is reinforced with reinforced nylon fiber. The fifth is fully packaged with EPDM elastic rubber, which can effectively improve the service life of the diaphragm.
application
Widely used in petrochemical industry, medicine, food, thermal power plants, nuclear power, environmental protection, mining, national defense and other scientific research and production departments.
Â
Automotives Accessories Lighting Door Handle Mirror Air Vents
Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com