Magnetic pump operation precautions

1. Prevent particles from entering (1) Does not allow ferromagnetic impurities, particles into the magnetic clutch and bearing friction. (2) After conveying the easily crystallized or precipitated medium, it should be rinsed promptly (after the pump is stopped, pour water into the pump chamber and discharge clean after running 1min) to ensure the service life of the sliding bearing. (3) When transporting media containing solid particles, filter at the inlet of the pump tube.
2. Prevent demagnetization (1) Magnetic moment can not be designed too small. (2) It should be run under the specified temperature, the medium temperature is strictly not allowed. A platinum resistance temperature sensor can be installed on the outer surface of the magnetic pump isolation sleeve to detect the temperature rise in the annulus area so as to alarm or stop when the temperature exceeds the limit.
3. Prevent dry friction (1) Do not idle. (2) It is forbidden to use the medium to empty. (3) In the case of the outlet valve is closed, the pump continuous operation time shall not exceed 2min, to prevent the magnetic actuator from overheating failure.

Casseroles

We are professional on the Cookware production, stock pot and soup pot, casserole, saucepans, saute pan, cooking pan and pots and so on.

We can meet your special requirement of the any cookware items.

Our cookware is hot selling in worldwide.

Welcome to sent the inquiry and check our quotation.


4 Jpg6 Jpg

casserole, casseroles, casserole set, stainless steel casserole, cooking pot

Jiangmen Wellway Houseware Co.,Ltd , https://www.hkwellway.com