The reporter learned from the Special Equipment Safety Supervision Bureau of the State Administration of Quality Supervision, Inspection and Quarantine on November 21 that since the country’s special equipment safety accidents and deaths dropped by 11% and 16% respectively year-on-year in the first three quarters of this year, the national special equipment accident continued in October. A downward trend. As of the end of October, there were 219 special equipment accidents and 239 deaths in the country, down by 13.1% and 17.1% year-on-year respectively. The country's special rectification of special equipment has achieved initial success.
In May of this year, in accordance with the requirements of the State Council’s Safe Production Committee to carry out investigation and rectification of hidden dangers, the AQSIQ decided to carry out investigations on hidden dangers of special equipment throughout the country, and explicitly used seven 100% hard indicators to evaluate the effectiveness of local special equipment safety supervision work. As of the end of October, the uncensored production check-and-punishment rate of these seven assessment indicators reached 99.4%, the registration rate reached 96.3%, the key monitoring equipment operator's holding rate reached 97.3%, and the regular monitoring equipment's periodic inspection rate reached 96.8%. The inspection rate of process supervision reached 99.6%, the inspection and correction rate of major hidden dangers reached 98.0%, and the rate of accidents with major accidents was 97.4%. Compared with September, except for the registration rate of special equipment, which is basically the same, the other six indicators have been greatly increased.
According to the person in charge of the Special Equipment Safety Supervision Bureau, the special rectification work carried out in the previous phase mainly has the following five characteristics: First, it has received the support of local governments, and some provincial and municipal governments have made clear requirements for the special rectification of special equipment. The second is to study and formulate relevant laws, regulations and supporting measures. The third is to strengthen the cooperation with the relevant departments, the various geological supervision departments actively coordinate the Finance Bureau, the State Administration of Work Safety, the Public Security Department, the State-owned Assets Supervision and Administration Commission, and the National Development and Reform Commission and other departments, forming a hidden mechanism for the elimination of departmental linkage hazards. The fourth is to innovate the working mechanism and method, establish a special rectification internal linkage working mechanism, implement the dynamic tracking of the hidden account equipment to establish the ledger, and divide the segmentation into the supervision responsible person, and sign the hidden responsibility investigation objective responsibility form with the use unit. Fifth, strict hierarchical supervision and responsibilities assessment.
It is understood that since the start of the investigation of hidden troubles in special equipment throughout the country, as of the end of October, the quality inspection bureaus at all levels across the country have inspected and produced 234,000 units of special equipment and used units, inspected 977,000 units of special equipment, and discovered 47,000 units of equipment with major hidden dangers. , Overseeing the rectification of 35,000 units of major hidden dangers, punishing 47,000 illegal units, and reporting 2,416 major issues to local governments.
In May of this year, in accordance with the requirements of the State Council’s Safe Production Committee to carry out investigation and rectification of hidden dangers, the AQSIQ decided to carry out investigations on hidden dangers of special equipment throughout the country, and explicitly used seven 100% hard indicators to evaluate the effectiveness of local special equipment safety supervision work. As of the end of October, the uncensored production check-and-punishment rate of these seven assessment indicators reached 99.4%, the registration rate reached 96.3%, the key monitoring equipment operator's holding rate reached 97.3%, and the regular monitoring equipment's periodic inspection rate reached 96.8%. The inspection rate of process supervision reached 99.6%, the inspection and correction rate of major hidden dangers reached 98.0%, and the rate of accidents with major accidents was 97.4%. Compared with September, except for the registration rate of special equipment, which is basically the same, the other six indicators have been greatly increased.
According to the person in charge of the Special Equipment Safety Supervision Bureau, the special rectification work carried out in the previous phase mainly has the following five characteristics: First, it has received the support of local governments, and some provincial and municipal governments have made clear requirements for the special rectification of special equipment. The second is to study and formulate relevant laws, regulations and supporting measures. The third is to strengthen the cooperation with the relevant departments, the various geological supervision departments actively coordinate the Finance Bureau, the State Administration of Work Safety, the Public Security Department, the State-owned Assets Supervision and Administration Commission, and the National Development and Reform Commission and other departments, forming a hidden mechanism for the elimination of departmental linkage hazards. The fourth is to innovate the working mechanism and method, establish a special rectification internal linkage working mechanism, implement the dynamic tracking of the hidden account equipment to establish the ledger, and divide the segmentation into the supervision responsible person, and sign the hidden responsibility investigation objective responsibility form with the use unit. Fifth, strict hierarchical supervision and responsibilities assessment.
It is understood that since the start of the investigation of hidden troubles in special equipment throughout the country, as of the end of October, the quality inspection bureaus at all levels across the country have inspected and produced 234,000 units of special equipment and used units, inspected 977,000 units of special equipment, and discovered 47,000 units of equipment with major hidden dangers. , Overseeing the rectification of 35,000 units of major hidden dangers, punishing 47,000 illegal units, and reporting 2,416 major issues to local governments.
Iron shavings briquetting machine is mainly used for all kinds of scrap metal, scrap iron, copper scrap, aluminum scrap, etc.), powder, granular powder, metal smelting additives, sponge iron bearing etc. Without any adhesion agent, the block (weight 2-8 kg) density can reach more than 5 t/M3, the briquettes can directly be used in furnace. Independent electrical control system, reliable operation, intuitive operation, easy maintenance.
Iron Briquetter, Iron Scraps Briquette Machine, Iron Chips Briquette Machine, Iron Briquetting Press, Iron Briquetting Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balingmachine.com