The launch ceremony for the second phase of the Weichai Lanqing WP12 and WP10 assembly line was held at Weichai Power Plant No.2.
The Lanqing WP12 Phase II production line has a total of 103 stations, of which 15 are automatic stations, 15 are semi-automatic stations, and the rest are manual stations. The design and production cycle time is 3 minutes and the annual production capacity is 100,000 units. This line draws on the advantages of Lanqing Phase I production line, extensively uses information technology tools, has a high degree of automation, online testing equipment, and strong quality assurance capabilities.
The WP10 assembly line adopts a combination of motorized raceway and ground tow chain. The total number of stations is 48 stations. It features fast response, convenient and flexible production organization. The main bolts of the engine on the assembly line are completed by tightening the shaft, and the rest of the bolts are tightened with pneumatic tools controlled by constant torque to ensure the assembly quality of engine components.
The design and installation of the Lanqing WP12 Phase 2 project and the WP10 assembly line not only captured the length of the Lanqing Phase I and 615 assembly lines, but also paid more attention to the features of simple, practical, lean and fast production. The official commissioning of the two production lines indicates that the No. 2 plant already has an annual production capacity of 200,000 engines, and that the No. 2 plant has become the only producer of Weichai No. 3, No. 4, No. 5 and No. 4 valves WP12. The production base of the engine has added to the company the production capacity of 200 WP10s per day.
The Lanqing WP12 Phase II production line has a total of 103 stations, of which 15 are automatic stations, 15 are semi-automatic stations, and the rest are manual stations. The design and production cycle time is 3 minutes and the annual production capacity is 100,000 units. This line draws on the advantages of Lanqing Phase I production line, extensively uses information technology tools, has a high degree of automation, online testing equipment, and strong quality assurance capabilities.
The WP10 assembly line adopts a combination of motorized raceway and ground tow chain. The total number of stations is 48 stations. It features fast response, convenient and flexible production organization. The main bolts of the engine on the assembly line are completed by tightening the shaft, and the rest of the bolts are tightened with pneumatic tools controlled by constant torque to ensure the assembly quality of engine components.
The design and installation of the Lanqing WP12 Phase 2 project and the WP10 assembly line not only captured the length of the Lanqing Phase I and 615 assembly lines, but also paid more attention to the features of simple, practical, lean and fast production. The official commissioning of the two production lines indicates that the No. 2 plant already has an annual production capacity of 200,000 engines, and that the No. 2 plant has become the only producer of Weichai No. 3, No. 4, No. 5 and No. 4 valves WP12. The production base of the engine has added to the company the production capacity of 200 WP10s per day.
PET Metallized Thermal Lamination Film
PET Metallised Thermal Laminating film is made by PET Metallic Film and EVA. We use extrusion coating process to combine the two layers. Metallized PET Thermal Lamination Film has single side corona treated, It makes the package look nice, precious and high value. It has high oxidation resistance and moisture barrier. It's a durable, cost-effective replacement for foil in a typical paper.
PET Metallised Thermal Laminating Film,Metallized PET Thermal Lamination Film, Metallic PET Lamination Film, Metallized PET Thermal Film, PET Metallised Film, PET Metallized Thermal Film, Gold and Silver Metallized PET Thermal Lamination Film
GR (SHANDONG) NEW MATERIAL CO., LTD , https://www.grmaterial-film.com